tcpprep

NAME

tcpprep - Create a tcpreplay cache cache file from a pcap file.

SYNOPSIS

tcpprep [-flags] [-flag [value]] [--option-name[[=| ]value]]

All arguments must be options.

tcpprep is a pcap(3) file pre-processor which creates a cache file which provides "rules" for tcprewrite(1) and tcpreplay(1) on how to process and send packets.

DESCRIPTION

The basic operation of tcpreplay is to resend all packets from the input file(s) out a single file. Tcpprep processes a pcap file and applies a set of user-specified rules to create a cache file which tells tcpreplay whether or not to send each packet and which interface the packet should be sent out of.

For more details, please see the Tcpreplay Manual at: http://tcpreplay.appneta.com

OPTIONS

-d number, --dbug=number Enable debugging output. This option may appear
up to 1 times. This option takes an integer number as its argument. The
value of number is constrained to being:

in the range 0 through 5

The default number for this option is:
0

If configured with --enable-debug, then you can specify a verbosity level
for debugging output. Higher numbers increase verbosity.

-a string, --auto=string Auto-split mode. This option may appear up to 1
times. This option must not appear in combination with any of the
following options: cidr, port, regex, mac.

Tcpprep will try to automatically determine the primary function of hosts
based on the traffic captured and classify each host as client or server.
In order to do so, you must provide a hint to tcpprep as to how to search
for clients and servers. Valid hints are:

bridge Bridge mode processes each packet to try to determine if the sender
is a client or server. Once all the packets are processed, the results are
weighed according to the server/client ratio (--ratio) and systems are
assigned an interface. If tcpprep is unable to determine what role a
system plays, tcpprep will abort.

router Router mode works just like bridge mode, except that after weighing
is done, systems which are undetermined are considered a server if they
fall inside a network known to contain other servers. Router has a greater
chance of successfully splitting clients and servers but is not 100%
foolproof.

client Client mode works just like bridge mode, except that unclassified
systems are treated as clients. Client mode should always complete
successfully.

server Server mode works just like bridge mode, except that unclassified
systems are treated as servers. Server mode should always complete
successfully.

first First mode works by looking at the first time each IP is seen in the
SRC and DST fields in the IP header. If the host is first seen in the SRC
field, it is a client and if it’s first seen in the DST field, it is marked
as a server. This effectively replicates the processing of the tomahawk
test tool. First mode should always complete successfully.

-c string, --cidr=string CIDR-split mode. This option may appear up to 1
times. This option must not appear in combination with any of the
following options: auto, port, regex, mac.

Specify a comma delimited list of CIDR netblocks to match against the
source IP of each packet. Packets matching any of the CIDR’s are
classified as servers.

IPv4 Example:
--cidr=192.168.0.0/16,172.16.0.0/12,10.0.0.0/8
IPv6 Example:
--cidr=[::ffff:0:0/96],[fe80::/16]

-r string, --regex=string Regex-split mode. This option may appear up to 1
times. This option must not appear in combination with any of the
following options: auto, port, cidr, mac.

Specify a regular expression to match against the source IP of each packet.
Packets matching the regex are classified as servers.

-p, --port Port-split mode. This option may appear up to 1 times. This
option must not appear in combination with any of the following options:
auto, regex, cidr, mac.

Specifies that TCP and UDP traffic over IPv4 and IPv6 should be classified
as client or server based upon the destination port of the header.

-e string, --mac=string Source MAC split mode. This option may appear up
to 1 times. This option must not appear in combination with any of the
following options: auto, regex, cidr, port.

Specify a list of MAC addresses to match against the source MAC of each
packet. Packets matching one of the values are classified as servers.

--reverse Matches to be client instead of server. This option may appear
up to 1 times.

Normally the --mac, --regex and --cidr flags specify are used to specify
the servers and non-IP packets are classified as clients. By using
--reverse, these features are reversed so that the flags specify clients
and non-IP packets are classified as servers.

-C string, --comment=string Embedded cache file comment. This option may
appear up to 1 times.

Specify a comment to be imbedded within the output cache file and later
viewed.

--no-arg-comment Do not embed any cache file comment. This option may
appear up to 1 times.

By default, tcpprep includes the arguments passed on the command line in
the cache file comment (in addition to any user specified --comment). If
for some reason you do not wish to include this, specify this option.

-x string, --include=string Include only packets matching rule. This
option may appear up to 1 times. This option must not appear in
combination with any of the following options: exclude.

Override default of processing all packets stored in the capture file and
only send/edit packets which match the provided rule. Rules can be one of:

S:<CIDR1>,... - Source IP must match specified IPv4/v6 CIDR(s)

D:<CIDR1>,... - Destination IP must match specified IPv4/v6 CIDR(s)

B:<CIDR1>,... - Both source and destination IP must match specified
IPv4/v6 CIDR(s)

E:<CIDR1>,... - Either IP must match specified IPv4/v6 CIDR(s)

P:<LIST> - Must be one of the listed packets where the list corresponds to
the packet number in the capture file.
-x P:1-5,9,15,72-
would process packets 1 through 5, the 9th and 15th packet, and packets 72
until the end of the file

F:’<bpf>’ - BPF filter. See the tcpdump(8) man page for syntax.

-X string, --exclude=string Exclude any packet matching this rule. This
option may appear up to 1 times. This option must not appear in
combination with any of the following options: include.

Override default of processing all packets stored in the capture file and
only send/edit packets which do NOT match the provided rule. Rules can be
one of:

S:<CIDR1>,... - Source IP must not match specified IPv4/v6 CIDR(s)

D:<CIDR1>,... - Destination IP must not match specified IPv4/v6 CIDR(s)

B:<CIDR1>,... - Both source and destination IP must not match specified
IPv4/v6 CIDR(s)

E:<CIDR1>,... - Either IP must not match specified IPv4/v6 CIDR(s)

P:<LIST> - Must not be one of the listed packets where the list corresponds
to the packet number in the capture file.
-x P:1-5,9,15,72-
would skip packets 1 through 5, the 9th and 15th packet, and packets 72
until the end of the file

-o string, --cachefile=string Output cache file. This option may appear up
to 1 times.

-i string, --pcap=string Input pcap file to process. This option may
appear up to 1 times.

-P string, --print-comment=string Print embedded comment in the specified
cache file. This option may appear up to 1 times.

-I string, --print-info=string Print basic info from the specified cache
file. This option may appear up to 1 times.

-S string, --print-stats=string Print statistical information about the
specified cache file. This option may appear up to 1 times.

-s string, --services=string Load services file for server ports. This
option may appear up to 1 times. This option must appear in combination
with the following options: port.

Uses a list of ports used by servers in the same format as of
/etc/services: <service_name> <port>/<protocol> # comment

Example: http 80/tcp

-N, --nonip Send non-IP traffic out server interface. This option may
appear up to 1 times.

By default, non-IP traffic which can not be classified as client or server
is classified as "client". Specifying --nonip will reclassify non-IP
traffic as "server". Note that the meaning of this flag is reversed if
--reverse is used.

-R string, --ratio=string Ratio of client to server packets. This option
may appear up to 1 times. This option must appear in combination with the
following options: auto. The default string for this option is:
2.0

Since a given host may have both client and server traffic being sent
to/from it, tcpprep uses a ratio to weigh these packets. If you would like
to override the default of 2:1 server to client packets required for a host
to be classified as a server, specify it as a floating point value.

-m number, --minmask=number Minimum network mask length in auto mode. This
option may appear up to 1 times. This option must appear in combination
with the following options: auto. This option takes an integer number as
its argument. The value of number is constrained to being:

in the range 0 through 32

The default number for this option is:
30

By default, auto modes use a minimum network mask length of 30 bits to
build networks containing clients and servers. This allows you to override
this value. Larger values will increase performance but may provide
inaccurate results.

-M number, --maxmask=number Maximum network mask length in auto mode. This
option may appear up to 1 times. This option must appear in combination
with the following options: auto. This option takes an integer number as
its argument. The value of number is constrained to being:

in the range 0 through 32

The default number for this option is:
8

By default, auto modes use a maximum network mask length of 8 bits to build
networks containing clients and servers. This allows you to override this
value. Larger values will decrease performance and accuracy but will
provide greater chance of success.

-v, --verbose Print decoded packets via tcpdump to STDOUT. This option may
appear up to 1 times.

-A string, --decode=string Arguments passed to tcpdump decoder. This
option may appear up to 1 times. This option must appear in combination
with the following options: verbose.

When enabling verbose mode (-v) you may also specify one or more additional
arguments to pass to tcpdump to modify the way packets are decoded. By
default, -n and -l are used. Be sure to quote the arguments so that they
are not interpreted by tcprewrite. The following arguments are valid:
[ -aAeNqRStuvxX ]
[ -E spi@ipaddr algo:secret,... ]
[ -s snaplen ]

-V, --version Print version information.

-h, --less-help Display less usage information and exit.

This option has not been fully documented.

-H, --help Display usage information and exit.

-!, --more-help Pass the extended usage information through a pager.

--save-opts [=cfgfile] Save the option state to cfgfile. The default is
the last configuration file listed in the OPTION PRESETS section, below.
The command will exit after updating the config file.

--load-opts=cfgfile, --no-load-opts Load options from cfgfile. The
no-load-opts form will disable the loading of earlier config/rc/ini files.
--no-load-opts is handled early, out of order.

OPTION PRESETS

Any option that is not marked as not presettable may be preset by loading values from configuration ("RC" or ".INI") file(s). The homerc file is "$$/", unless that is a directory. In that case, the file ".tcppreprc" is searched for within that directory.

FILES

See OPTION PRESETS for configuration files.

EXIT STATUS

One of the following exit values will be returned:
0 (EXIT_SUCCESS) Successful program execution.

1 (EXIT_FAILURE) The operation failed or the command syntax was not
valid.

66 (EX_NOINPUT) A specified configuration file could not be loaded.

70 (EX_SOFTWARE) libopts had an internal operational error. Please
report it to autogen-users@lists.sourceforge.net. Thank you.

AUTHORS

Copyright 2013-2022 Fred Klassen - AppNeta Copyright 2000-2012 Aaron Turner For support please use the tcpreplay-users@lists.sourceforge.net mailing list. The latest version of this software is always available from: http://tcpreplay.appneta.com/

COPYRIGHT

Copyright (C) 2000-2022 Aaron Turner and Fred Klassen all rights reserved. This program is released under the terms of the GNU General Public License, version 3 or later.

BUGS

Please send bug reports to: tcpreplay-users@lists.sourceforge.net

NOTES

This manual page was AutoGen-erated from the tcpprep option definitions.