|
on |
|
Power on machine. |
|
|
off |
|
Power off machine. |
|
reboot
Reboot machine.
status
This returns the status of the
plug/virtual machine.
|
list |
|
List available plugs with aliases/virtual machines if
there is support for more then one device. Returns N/A
otherwise. |
list-status
List available plugs with
aliases/virtual machines and their power state if it can be
obtained without additional commands.
monitor
Check the health of fence
device
metadata
Display the XML metadata
describing this resource.
manpage
The operational behavior of
this is not known.
validate-all
Validate if all required
parameters are entered.
STDIN PARAMETERS
action
Fencing action (Default Value:
reboot)
method
Method to fence (onoff|cycle)
(Default Value: cycle)
|
plug |
|
Physical plug number on device, UUID or identification
of machine This parameter is always required. Obsoletes:
port |
|
zone |
|
Zone. |
project
Project ID.
stackdriver_logging
Stackdriver-logging support.
Obsoletes: stackdriver-logging
baremetalsolution
If enabled this is a bare metal
offering from google.
apitimeout
Timeout in seconds to use for
API calls, default is 60. (Default Value: 60)
retries
Number of retries on failure
for API calls, default is 3. (Default Value: 3)
retrysleep
Time to sleep in seconds
between API retries, default is 5. (Default Value: 5)
serviceaccount
Service Account to use for
authentication to the google cloud APIs.
plugzonemap
Comma separated zone map when
fencing multiple plugs.
proxyhost
If a proxy is used for internet
access, the proxy host should be specified.
proxyport
If a proxy is used for internet
access, the proxy port should be specified.
earlyexit
If an existing reset operation
is detected, the fence agent will return before the
operation completes with a 0 return code.
warntimeout
If the operation is not
completed within the timeout, the cluster operations are
allowed to continue.
errortimeout
If the operation is not
completed within the timeout, cluster is notified of the
operation failure.
runonwarn
If a timeout would occur while
running the agent, then the supplied command is run.
runonfail
If a failure would occur while
running the agent, then the supplied command is run.
|
quiet |
|
Disable logging to stderr. Does not affect --verbose or
--debug-file or logging to syslog. |
verbose
Verbose mode. Multiple -v flags
can be stacked on the command line (e.g., -vvv) to increase
verbosity.
verbose_level
Level of debugging detail in
output. Defaults to the number of --verbose flags specified
on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
debug_file
Write debug information to
given file Obsoletes: debug
version
Display version information and
exit
|
help |
|
Display help and exit |
|
plug_separator
Separator for plug parameter
when specifying more than 1 plug (Default Value: ,)
separator
Separator for CSV created by
’list’ operation (Default Value: ,)
|
delay |
|
Wait X seconds before fencing is started (Default Value:
0) |
|
disable_timeout
Disable timeout (true/false)
(default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt
after login (Default Value: 5)
power_timeout
Test X seconds for status
change after ON/OFF (Default Value: 60)
power_wait
Wait X seconds after issuing
ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt
after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status
calls during a STONITH action (Default Value: 1)
retry_on
Count of attempts to retry
power on (Default Value: 1)
fence_gce
8
general
|