Manpages-Dev

• __after_morecore_hook(3) malloc debugging variables (DEPRECATED)
• __clone2(2) create a child process
• __fbufsize(3) interfaces to stdio FILE structure
• __flbf(3) interfaces to stdio FILE structure
• __fpending(3) interfaces to stdio FILE structure
• __fpurge(3) purge a stream
• __freadable(3) interfaces to stdio FILE structure
• __freading(3) interfaces to stdio FILE structure
• __free_hook(3) malloc debugging variables (DEPRECATED)
• __fsetlocking(3) interfaces to stdio FILE structure
• __fwritable(3) interfaces to stdio FILE structure
• __fwriting(3) interfaces to stdio FILE structure
• __malloc_hook(3) malloc debugging variables (DEPRECATED)
• __malloc_initialize_hook(3) malloc debugging variables (DEPRECATED)
• __memalign_hook(3) malloc debugging variables (DEPRECATED)
• __ppc_get_timebase_freq(3) get the current value
• __ppc_get_timebase(3) get the current value
• __ppc_mdoio(3) Hint the processor to release shared resources
• __ppc_mdoom(3) Hint the processor to release shared resources
• __ppc_set_ppr_low(3) Set the Program Priority Register
• __ppc_set_ppr_med_high(3) Set the Program Priority Register
• __ppc_set_ppr_med_low(3) Set the Program Priority Register
• __ppc_set_ppr_med(3) Set the Program Priority Register
• __ppc_set_ppr_very_low(3) Set the Program Priority Register
• __ppc_yield(3) Hint the processor to release shared resources
• __realloc_hook(3) malloc debugging variables (DEPRECATED)
• __setfpucw(3) set FPU control word on i386 architecture (obsolete)
• _exit(2) terminate the calling process
• _flushlbf(3) interfaces to stdio FILE structure
• _Generic(3) type-generic selection
• _llseek(2) reposition read/write file offset
• _newselect(2) synchronous I/O multiplexing
• _Static_assert(3) fail compilation if assertion is false
• _syscall(2) invoking a system call without library support (OBSOLETE)
• _sysctl(2) read/write system parameters
• a64l(3) convert between long and base-64
• abort(3) cause abnormal process termination
• abs(3) compute the absolute value of an integer
• accept(2) accept a connection on a socket
• accept4(2) accept a connection on a socket
• access(2) check user's permissions for a file
• acct(2) switch process accounting on or off
• acos(3) arc cosine function
• acosf(3) arc cosine function
• acosh(3) inverse hyperbolic cosine function
• acoshf(3) inverse hyperbolic cosine function
• acoshl(3) inverse hyperbolic cosine function
• acosl(3) arc cosine function
• add_key(2) add a key to the kernel's key management facility
• addmntent(3) get filesystem descriptor file entry
• addseverity(3) introduce new severity classes
• adjtime(3) correct the time to synchronize the system clock
• adjtimex(2) tune kernel clock
• afs_syscall(2) unimplemented system calls
• aio_cancel(3) cancel an outstanding asynchronous I/O request
• aio_error(3) get error status of asynchronous I/O operation
• aio_fsync(3) asynchronous file synchronization
• aio_init(3) asynchronous I/O initialization
• aio_read(3) asynchronous read
• aio_return(3) get return status of asynchronous I/O operation
• aio_suspend(3) wait for asynchronous I/O operation or timeout
• aio_write(3) asynchronous write
• alarm(2) set an alarm clock for delivery of a signal
• aligned_alloc(3) allocate aligned memory
• alloc_hugepages(2) allocate or free huge pages
• alloca(3) allocate memory that is automatically freed
• alphasort(3) scan
• arc4random_buf(3) cryptographically-secure pseudorandom number generator
• arc4random_uniform(3) cryptographically-secure pseudorandom number generator
• arc4random(3) cryptographically-secure pseudorandom number generator
• arch_prctl(2) set architecture-specific thread state
• argz_add_sep(3) functions to handle an argz list
• argz_add(3) functions to handle an argz list
• argz_append(3) functions to handle an argz list
• argz_count(3) functions to handle an argz list
• argz_create_sep(3) functions to handle an argz list
• argz_create(3) functions to handle an argz list
• argz_delete(3) functions to handle an argz list
• argz_extract(3) functions to handle an argz list
• argz_insert(3) functions to handle an argz list
• argz_next(3) functions to handle an argz list
• argz_replace(3) functions to handle an argz list
• argz_stringify(3) functions to handle an argz list
• argz(3) functions to handle an argz list
• arm_fadvise(2) predeclare an access pattern for file data
• arm_fadvise64_64(2) predeclare an access pattern for file data
• arm_sync_file_range(2) sync a file segment with disk
• asctime_r(3) transform date and time to broken-down time or ASCII
• asctime(3) transform date and time to broken-down time or ASCII
• asin(3) arc sine function
• asinf(3) arc sine function
• asinh(3) inverse hyperbolic sine function
• asinhf(3) inverse hyperbolic sine function
• asinhl(3) inverse hyperbolic sine function
• asinl(3) arc sine function
• asprintf(3) print to allocated string
• assert_perror(3) test errnum and abort
• assert(3) abort the program if assertion is false
• atan(3) arc tangent function
• atan2(3) arc tangent function of two variables
• atan2f(3) arc tangent function of two variables
• atan2l(3) arc tangent function of two variables
• atanf(3) arc tangent function
• atanh(3) inverse hyperbolic tangent function
• atanhf(3) inverse hyperbolic tangent function
• atanhl(3) inverse hyperbolic tangent function
• atanl(3) arc tangent function
• atexit(3) register a function to be called at normal process termination
• atof(3) convert a string to a double
• atoi(3) convert a string to an integer
• atol(3) convert a string to an integer
• atoll(3) convert a string to an integer
• atoq(3) convert a string to an integer
• auth_destroy(3) library routines for remote procedure calls
• authnone_create(3) library routines for remote procedure calls
• authunix_create_default(3) library routines for remote procedure calls
• authunix_create(3) library routines for remote procedure calls
• backtrace_symbols_fd(3) support
• backtrace_symbols(3) support
• backtrace(3) support
• baseName(3) parse pathname components
• bcmp(3) compare byte sequences
• bcopy(3) copy byte sequence
• bdflush(2) start, flush, or tune buffer-dirty-flush daemon
• be16toh(3) convert values between host and big-/little-endian byte order
• be32toh(3) convert values between host and big-/little-endian byte order
• be64toh(3) convert values between host and big-/little-endian byte order
• bind(2) bind a name to a socket
• bindresvport(3) bind a socket to a privileged IP port
• bpf(2) perform a command on an extended BPF map or program
• break(2) unimplemented system calls
• brk(2) change data segment size
• bsd_signal(3) signal handling with BSD semantics
• bsearch(3) binary search of a sorted array
• bstring(3) byte string operations
• bswap_16(3) reverse order of bytes
• bswap_32(3) reverse order of bytes
• bswap_64(3) reverse order of bytes
• bswap(3) reverse order of bytes
• btowc(3) convert single byte to wide character
• btree(3) btree database access method
• byteorder(3) convert values between host and network
• bzero(3) zero a byte string
• cabs(3) absolute value of a complex number
• cabsf(3) absolute value of a complex number
• cabsl(3) absolute value of a complex number
• cacheflush(2) flush contents of instruction and/or data cache
• cacos(3) complex arc cosine
• cacosf(3) complex arc cosine
• cacosh(3) complex arc hyperbolic cosine
• cacoshf(3) complex arc hyperbolic cosine
• cacoshl(3) complex arc hyperbolic cosine
• cacosl(3) complex arc cosine
• calloc(3) allocate and free dynamic memory
• callrpc(3) library routines for remote procedure calls
• canonicalize_file_name(3) return the canonicalized absolute pathname
• capget(2) set/get capabilities of thread(s)
• capset(2) set/get capabilities of thread(s)
• carg(3) calculate the complex argument
• cargf(3) calculate the complex argument
• cargl(3) calculate the complex argument
• casin(3) complex arc sine
• casinf(3) complex arc sine
• casinh(3) complex arc sine hyperbolic
• casinhf(3) complex arc sine hyperbolic
• casinhl(3) complex arc sine hyperbolic
• casinl(3) complex arc sine
• catan(3) complex arc tangents
• catanf(3) complex arc tangents
• catanh(3) complex arc tangents hyperbolic
• catanhf(3) complex arc tangents hyperbolic
• catanhl(3) complex arc tangents hyperbolic
• catanl(3) complex arc tangents
• catclose(3) open/close a message catalog
• catgets(3) get message from a message catalog
• catopen(3) open/close a message catalog
• cbc_crypt(3) fast
• cbrt(3) cube root function
• cbrtf(3) cube root function
• cbrtl(3) cube root function
• ccos(3) complex cosine function
• ccosf(3) complex cosine function
• ccosh(3) complex hyperbolic cosine
• ccoshf(3) complex hyperbolic cosine
• ccoshl(3) complex hyperbolic cosine
• ccosl(3) complex cosine function
• ceil(3) ceiling function: smallest integral value not
• ceilf(3) ceiling function: smallest integral value not
• ceill(3) ceiling function: smallest integral value not
• cexp(3) complex exponential function
• cexp2(3) base-2 exponent of a complex number
• cexp2f(3) base-2 exponent of a complex number
• cexp2l(3) base-2 exponent of a complex number
• cexpf(3) complex exponential function
• cexpl(3) complex exponential function
• cfgetispeed(3) get and set terminal attributes, line control, get and set baud rate
• cfgetospeed(3) get and set terminal attributes, line control, get and set baud rate
• cfmakeraw(3) get and set terminal attributes, line control, get and set baud rate
• cfree(3) free allocated memory
• cfsetispeed(3) get and set terminal attributes, line control, get and set baud rate
• cfsetospeed(3) get and set terminal attributes, line control, get and set baud rate
• cfsetspeed(3) get and set terminal attributes, line control, get and set baud rate
• chdir(2) change working directory
• chmod(2) change permissions of a file
• chown(2) change ownership of a file
• chown32(2) change ownership of a file
• chroot(2) change root directory
• cimag(3) get imaginary part of a complex number
• cimagf(3) get imaginary part of a complex number
• cimagl(3) get imaginary part of a complex number
• CIRCLEQ_EMPTY(3) implementation of a doubly linked circular queue
• CIRCLEQ_ENTRY(3) implementation of a doubly linked circular queue
• CIRCLEQ_FIRST(3) implementation of a doubly linked circular queue
• CIRCLEQ_FOREACH_REVERSE(3) implementation of a doubly linked circular queue
• CIRCLEQ_FOREACH(3) implementation of a doubly linked circular queue
• CIRCLEQ_HEAD_INITIALIZER(3) implementation of a doubly linked circular queue
• CIRCLEQ_HEAD(3) implementation of a doubly linked circular queue
• CIRCLEQ_INIT(3) implementation of a doubly linked circular queue
• CIRCLEQ_INSERT_AFTER(3) implementation of a doubly linked circular queue
• CIRCLEQ_INSERT_BEFORE(3) implementation of a doubly linked circular queue
• CIRCLEQ_INSERT_HEAD(3) implementation of a doubly linked circular queue
• CIRCLEQ_INSERT_TAIL(3) implementation of a doubly linked circular queue
• CIRCLEQ_LAST(3) implementation of a doubly linked circular queue
• CIRCLEQ_LOOP_NEXT(3) implementation of a doubly linked circular queue
• CIRCLEQ_LOOP_PREV(3) implementation of a doubly linked circular queue
• CIRCLEQ_NEXT(3) implementation of a doubly linked circular queue
• CIRCLEQ_PREV(3) implementation of a doubly linked circular queue
• CIRCLEQ_REMOVE(3) implementation of a doubly linked circular queue
• circleq(3) implementation of a doubly linked circular queue
• clearenv(3) clear the environment
• clearerr_unlocked(3) nonlocking stdio functions
• clearerr(3) check and reset stream status
• clnt_broadcast(3) library routines for remote procedure calls
• clnt_call(3) library routines for remote procedure calls
• clnt_control(3) library routines for remote procedure calls
• clnt_create(3) library routines for remote procedure calls
• clnt_destroy(3) library routines for remote procedure calls
• clnt_freeres(3) library routines for remote procedure calls
• clnt_geterr(3) library routines for remote procedure calls
• clnt_pcreateerror(3) library routines for remote procedure calls
• clnt_perrno(3) library routines for remote procedure calls
• clnt_perror(3) library routines for remote procedure calls
• clnt_spcreateerror(3) library routines for remote procedure calls
• clnt_sperrno(3) library routines for remote procedure calls
• clnt_sperror(3) library routines for remote procedure calls
• clntraw_create(3) library routines for remote procedure calls
• clnttcp_create(3) library routines for remote procedure calls
• clntudp_bufcreate(3) library routines for remote procedure calls
• clntudp_create(3) library routines for remote procedure calls
• clock_adjtime(2) tune kernel clock
• clock_getcpuclockid(3) obtain ID of a process CPU-time clock
• clock_getres(2) clock and time functions
• clock_gettime(2) clock and time functions
• clock_nanosleep(2) high-resolution sleep with specifiable clock
• clock_settime(2) clock and time functions
• clock(3) determine processor time
• clog(3) natural logarithm of a complex number
• clog10(3) base-10 logarithm of a complex number
• clog10f(3) base-10 logarithm of a complex number
• clog10l(3) base-10 logarithm of a complex number
• clog2(3) base-2 logarithm of a complex number
• clog2f(3) base-2 logarithm of a complex number
• clog2l(3) base-2 logarithm of a complex number
• clogf(3) natural logarithm of a complex number
• clogl(3) natural logarithm of a complex number
• clone(2) create a child process
• clone2(2) create a child process
• clone3(2) create a child process
• close_range(2) close all file descriptors in a given range
• close(2) close a file descriptor
• closedir(3) close a directory
• closelog(3) send messages to the system logger
• CMSG_ALIGN(3) access ancillary data
• CMSG_DATA(3) access ancillary data
• CMSG_FIRSTHDR(3) access ancillary data
• CMSG_LEN(3) access ancillary data
• CMSG_NXTHDR(3) access ancillary data
• CMSG_SPACE(3) access ancillary data
• cmsg(3) access ancillary data
• confstr(3) get configuration dependent string variables
• conj(3) calculate the complex conjugate
• conjf(3) calculate the complex conjugate
• conjl(3) calculate the complex conjugate
• connect(2) initiate a connection on a socket
• console_ioctl(4)
• copy_file_range(2) Copy a range of data from one file to another
• copysign(3) copy sign of a number
• copysignf(3) copy sign of a number
• copysignl(3) copy sign of a number
• cos(3) cosine function
• cosf(3) cosine function
• cosh(3) hyperbolic cosine function
• coshf(3) hyperbolic cosine function
• coshl(3) hyperbolic cosine function
• cosl(3) cosine function
• cpow(3) complex power function
• cpowf(3) complex power function
• cpowl(3) complex power function
• cproj(3) project into Riemann Sphere
• cprojf(3) project into Riemann Sphere
• cprojl(3) project into Riemann Sphere
• CPU_ALLOC_SIZE(3) macros for manipulating CPU sets
• CPU_ALLOC(3) macros for manipulating CPU sets
• CPU_AND_S(3) macros for manipulating CPU sets
• CPU_AND(3) macros for manipulating CPU sets
• CPU_CLR_S(3) macros for manipulating CPU sets
• CPU_CLR(3) macros for manipulating CPU sets
• CPU_COUNT_S(3) macros for manipulating CPU sets
• CPU_COUNT(3) macros for manipulating CPU sets
• CPU_EQUAL_S(3) macros for manipulating CPU sets
• CPU_EQUAL(3) macros for manipulating CPU sets
• CPU_FREE(3) macros for manipulating CPU sets
• CPU_ISSET_S(3) macros for manipulating CPU sets
• CPU_ISSET(3) macros for manipulating CPU sets
• CPU_OR_S(3) macros for manipulating CPU sets
• CPU_OR(3) macros for manipulating CPU sets
• CPU_SET_S(3) macros for manipulating CPU sets
• CPU_SET(3) macros for manipulating CPU sets
• CPU_XOR_S(3) macros for manipulating CPU sets
• CPU_XOR(3) macros for manipulating CPU sets
• CPU_ZERO_S(3) macros for manipulating CPU sets
• CPU_ZERO(3) macros for manipulating CPU sets
• creal(3) get real part of a complex number
• crealf(3) get real part of a complex number
• creall(3) get real part of a complex number
• creat(2) open and possibly create a file
• create_module(2) create a loadable module entry
• csin(3) complex sine function
• csinf(3) complex sine function
• csinh(3) complex hyperbolic sine
• csinhf(3) complex hyperbolic sine
• csinhl(3) complex hyperbolic sine
• csinl(3) complex sine function
• csqrt(3) complex square root
• csqrtf(3) complex square root
• csqrtl(3) complex square root
• ctan(3) complex tangent function
• ctanf(3) complex tangent function
• ctanh(3) complex hyperbolic tangent
• ctanhf(3) complex hyperbolic tangent
• ctanhl(3) complex hyperbolic tangent
• ctanl(3) complex tangent function
• ctermid(3) get controlling terminal name
• ctime_r(3) transform date and time to broken-down time or ASCII
• ctime(3) transform date and time to broken-down time or ASCII
• cuserid(3) get username
• daemon(3) run in the background
• daylight(3) initialize time conversion information
• db(3) database access methods
• dbopen(3) database access methods
• delete_module(2) unload a kernel module
• des_crypt(3) fast
• DES_FAILED(3) fast
• des_setparity(3) fast
• difftime(3) calculate time difference
• dirfd(3) get directory stream file descriptor
• dirName(3) parse pathname components
• div(3) compute quotient and remainder of
• dl_iterate_phdr(3) walk through list of shared objects
• dladdr(3) translate address to symbolic information
• dladdr1(3) translate address to symbolic information
• dlclose(3) open and close a shared object
• dlerror(3) obtain error diagnostic for functions in the dlopen API
• dlinfo(3) obtain information about a dynamically loaded object
• dlmopen(3) open and close a shared object
• dlopen(3) open and close a shared object
• dlsym(3) obtain address of a symbol in a shared object or executable
• dlvsym(3) obtain address of a symbol in a shared object or executable
• dn_comp(3) resolver routines
• dn_expand(3) resolver routines
• dprintf(3) formatted output conversion
• drand48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• drand48(3) generate uniformly distributed pseudo-random numbers
• drem(3) \
• dremf(3) \
• dreml(3) \
• dup(2) duplicate a file descriptor
• dup2(2) duplicate a file descriptor
• dup3(2) duplicate a file descriptor
• duplocale(3) duplicate a locale object
• dysize(3) get number of days for a given year
• eaccess(3) check effective user's permissions for a file
• ecb_crypt(3) fast
• ecvt_r(3) convert a floating-point number to a string
• ecvt(3) convert a floating-point number to a string
• edata(3) end of program segments
• encrypt_r(3) encrypt 64-bit messages
• encrypt(3) encrypt 64-bit messages
• end(3) end of program segments
• endaliasent(3) read an alias entry
• endfsent(3) handle fstab entries
• endgrent(3) get group file entry
• endhostent(3) get network host entry
• endian(3) convert values between host and big-/little-endian byte order
• endmntent(3) get filesystem descriptor file entry
• endnetent(3) get network entry
• endnetgrent(3) handle network group entries
• endprotoent(3) get protocol entry
• endpwent(3) get password file entry
• endrpcent(3) get
• endservent(3) get service entry
• endspent(3) get shadow password file entry
• endttyent(3) get ttys file entry
• endusershell(3) get permitted user shells
• endutent(3) access utmp file entries
• endutxent(3) access utmp file entries
• envz_add(3) environment string support
• envz_entry(3) environment string support
• envz_get(3) environment string support
• envz_merge(3) environment string support
• envz_remove(3) environment string support
• envz_strip(3) environment string support
• envz(3) environment string support
• epoll_create(2) open an epoll file descriptor
• epoll_create1(2) open an epoll file descriptor
• epoll_ctl(2) control interface for an epoll file descriptor
• epoll_pwait(2) wait for an I/O event on an epoll file descriptor
• epoll_pwait2(2) wait for an I/O event on an epoll file descriptor
• epoll_wait(2) wait for an I/O event on an epoll file descriptor
• erand48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• erand48(3) generate uniformly distributed pseudo-random numbers
• erf(3) error function
• erfc(3) complementary error function
• erfcf(3) complementary error function
• erfcl(3) complementary error function
• erff(3) error function
• erfl(3) error function
• err(3) formatted error messages
• errno(3) number of last error
• error_at_line(3) glibc error reporting functions
• error_message_count(3) glibc error reporting functions
• error_one_per_line(3) glibc error reporting functions
• error_print_progname(3) glibc error reporting functions
• error(3) glibc error reporting functions
• errx(3) formatted error messages
• etext(3) end of program segments
• ether_aton_r(3) Ethernet address manipulation routines
• ether_aton(3) Ethernet address manipulation routines
• ether_hostton(3) Ethernet address manipulation routines
• ether_line(3) Ethernet address manipulation routines
• ether_ntoa_r(3) Ethernet address manipulation routines
• ether_ntoa(3) Ethernet address manipulation routines
• ether_ntohost(3) Ethernet address manipulation routines
• euidaccess(3) check effective user's permissions for a file
• eventfd_read(3) create a file descriptor for event notification
• eventfd_write(3) create a file descriptor for event notification
• eventfd(2) create a file descriptor for event notification
• eventfd2(2) create a file descriptor for event notification
• exec(3) execute a file
• execl(3) execute a file
• execle(3) execute a file
• execlp(3) execute a file
• execv(3) execute a file
• execve(2) execute program
• execveat(2) execute program relative to a directory file descriptor
• execvp(3) execute a file
• execvpe(3) execute a file
• exit_group(2) exit all threads in a process
• exit(2) terminate the calling process
• exit(3) cause normal process termination
• exp(3) base-e exponential function
• exp10(3) base-10 exponential function
• exp10f(3) base-10 exponential function
• exp10l(3) base-10 exponential function
• exp2(3) base-2 exponential function
• exp2f(3) base-2 exponential function
• exp2l(3) base-2 exponential function
• expf(3) base-e exponential function
• expl(3) base-e exponential function
• explicit_bzero(3) zero a byte string
• expm1(3) exponential minus 1
• expm1f(3) exponential minus 1
• expm1l(3) exponential minus 1
• fabs(3) absolute value of floating-point number
• fabsf(3) absolute value of floating-point number
• fabsl(3) absolute value of floating-point number
• faccessat(2) check user's permissions for a file
• faccessat2(2) check user's permissions for a file
• fadvise64_64(2) predeclare an access pattern for file data
• fadvise64(2) predeclare an access pattern for file data
• fallocate(2) manipulate file space
• fanotify_init(2) create and initialize fanotify group
• fanotify_mark(2) add, remove, or modify an fanotify mark on a filesystem
• fattach(2) unimplemented system calls
• fchdir(2) change working directory
• fchmod(2) change permissions of a file
• fchmodat(2) change permissions of a file
• fchown(2) change ownership of a file
• fchown32(2) change ownership of a file
• fchownat(2) change ownership of a file
• fclose(3) close a stream
• fcloseall(3) close all open streams
• fcntl(2) manipulate file descriptor
• fcntl64(2) manipulate file descriptor
• fcvt_r(3) convert a floating-point number to a string
• fcvt(3) convert a floating-point number to a string
• FD_CLR(3) synchronous I/O multiplexing
• FD_ISSET(3) synchronous I/O multiplexing
• FD_SET(3) synchronous I/O multiplexing
• FD_ZERO(3) synchronous I/O multiplexing
• fdatasync(2) synchronize a file's in-core state with storage device
• fdetach(2) unimplemented system calls
• fdim(3) positive difference
• fdimf(3) positive difference
• fdiml(3) positive difference
• fdopen(3) stream open functions
• fdopendir(3) open a directory
• feclearexcept(3) floating-point rounding and exception handling
• fedisableexcept(3) floating-point rounding and exception handling
• feenableexcept(3) floating-point rounding and exception handling
• fegetenv(3) floating-point rounding and exception handling
• fegetexcept(3) floating-point rounding and exception handling
• fegetexceptflag(3) floating-point rounding and exception handling
• fegetround(3) floating-point rounding and exception handling
• feholdexcept(3) floating-point rounding and exception handling
• fenv(3) floating-point rounding and exception handling
• feof_unlocked(3) nonlocking stdio functions
• feof(3) check and reset stream status
• feraiseexcept(3) floating-point rounding and exception handling
• ferror_unlocked(3) nonlocking stdio functions
• ferror(3) check and reset stream status
• fesetenv(3) floating-point rounding and exception handling
• fesetexceptflag(3) floating-point rounding and exception handling
• fesetround(3) floating-point rounding and exception handling
• fetestexcept(3) floating-point rounding and exception handling
• feupdateenv(3) floating-point rounding and exception handling
• fexecve(3) execute program specified via file descriptor
• fflush_unlocked(3) nonlocking stdio functions
• fflush(3) flush a stream
• ffs(3) find first bit set in a word
• ffsl(3) find first bit set in a word
• ffsll(3) find first bit set in a word
• fgetc_unlocked(3) nonlocking stdio functions
• fgetc(3) input of characters and strings
• fgetgrent_r(3) get group file entry reentrantly
• fgetgrent(3) get group file entry
• fgetpos(3) reposition a stream
• fgetpwent_r(3) get passwd file entry reentrantly
• fgetpwent(3) get password file entry
• fgets_unlocked(3) nonlocking stdio functions
• fgets(3) input of characters and strings
• fgetspent_r(3) get shadow password file entry
• fgetspent(3) get shadow password file entry
• fgetwc_unlocked(3) nonlocking stdio functions
• fgetwc(3) read a wide character from a FILE stream
• fgetws_unlocked(3) nonlocking stdio functions
• fgetws(3) read a wide-character string from a FILE stream
• fgetxattr(2) retrieve an extended attribute value
• fileno_unlocked(3) nonlocking stdio functions
• fileno(3) obtain file descriptor of a stdio stream
• finit_module(2) load a kernel module
• finite(3) BSD floating-point classification functions
• finitef(3) BSD floating-point classification functions
• finitel(3) BSD floating-point classification functions
• flistxattr(2) list extended attribute names
• flock(2) apply or remove an advisory lock on an open file
• flockfile(3) lock FILE for stdio
• floor(3) largest integral value not greater than argument
• floorf(3) largest integral value not greater than argument
• floorl(3) largest integral value not greater than argument
• fma(3) floating-point multiply and add
• fmaf(3) floating-point multiply and add
• fmal(3) floating-point multiply and add
• fmax(3) determine maximum of two floating-point numbers
• fmaxf(3) determine maximum of two floating-point numbers
• fmaxl(3) determine maximum of two floating-point numbers
• fmemopen(3) open memory as stream
• fmin(3) determine minimum of two floating-point numbers
• fminf(3) determine minimum of two floating-point numbers
• fminl(3) determine minimum of two floating-point numbers
• fmod(3) floating-point remainder function
• fmodf(3) floating-point remainder function
• fmodl(3) floating-point remainder function
• fmtmsg(3) print formatted error messages
• fnmatch(3) match filename or pathname
• fopen(3) stream open functions
• fopencookie(3) opening a custom stream
• fork(2) create a child process
• forkpty(3) terminal utility functions
• fpathconf(3) get configuration values for files
• fpclassify(3) floating-point
• fprintf(3) formatted output conversion
• fpurge(3) purge a stream
• fputc_unlocked(3) nonlocking stdio functions
• fputc(3) output of characters and strings
• fputs_unlocked(3) nonlocking stdio functions
• fputs(3) output of characters and strings
• fputwc_unlocked(3) nonlocking stdio functions
• fputwc(3) write a wide character to a FILE stream
• fputws_unlocked(3) nonlocking stdio functions
• fputws(3) write a wide-character string to a FILE stream
• fread_unlocked(3) nonlocking stdio functions
• fread(3) binary stream input/output
• free_hugepages(2) allocate or free huge pages
• free(3) allocate and free dynamic memory
• freeaddrinfo(3) network address and
• freehostent(3) get network
• freeifaddrs(3) get interface addresses
• freelocale(3) create, modify, and free a locale object
• fremovexattr(2) remove an extended attribute
• freopen(3) stream open functions
• frexp(3) convert floating-point number to fractional
• frexpf(3) convert floating-point number to fractional
• frexpl(3) convert floating-point number to fractional
• fscanf(3) input FILE format conversion
• fseek(3) reposition a stream
• fseeko(3) seek to or report file position
• fsetpos(3) reposition a stream
• fsetxattr(2) set an extended attribute value
• fstat(2) get file status
• fstat64(2) get file status
• fstatat(2) get file status
• fstatat64(2) get file status
• fstatfs(2) get filesystem statistics
• fstatfs64(2) get filesystem statistics
• fstatvfs(3) get filesystem statistics
• fsync(2) synchronize a file's in-core state with storage device
• ftell(3) reposition a stream
• ftello(3) seek to or report file position
• ftime(3) return date and time
• ftok(3) convert a pathname and a project identifier to a System V IPC key
• ftruncate(2) truncate a file to a specified length
• ftruncate64(2) truncate a file to a specified length
• ftrylockfile(3) lock FILE for stdio
• fts_children(3) \
• fts_close(3) \
• fts_open(3) \
• fts_read(3) \
• fts_set(3) \
• fts(3) \
• ftw(3) file tree walk
• funlockfile(3) lock FILE for stdio
• futex(2) fast user-space locking
• futimens(3) change file timestamps with nanosecond precision
• futimes(3) change file timestamps
• futimesat(2) change timestamps of a file relative to a \
• fwide(3) set and determine the orientation of a FILE stream
• fwprintf(3) formatted
• fwrite_unlocked(3) nonlocking stdio functions
• fwrite(3) binary stream input/output
• gai_cancel(3) asynchronous
• gai_error(3) asynchronous
• gai_strerror(3) network address and
• gai_suspend(3) asynchronous
• gamma(3) (logarithm of the) gamma function
• gammaf(3) (logarithm of the) gamma function
• gammal(3) (logarithm of the) gamma function
• gcvt(3) convert a floating-point number to a string
• get_avphys_pages(3) get total and available physical
• get_current_dir_name(3) get current working directory
• get_kernel_syms(2) retrieve exported kernel and module symbols
• get_mempolicy(2) retrieve NUMA memory policy for a thread
• get_myaddress(3) library routines for remote procedure calls
• get_nprocs_conf(3) get number of processors
• get_nprocs(3) get number of processors
• get_phys_pages(3) get total and available physical
• get_robust_list(2) get/set list of robust futexes
• get_thread_area(2) manipulate thread-local storage information
• getaddrinfo_a(3) asynchronous
• getaddrinfo(3) network address and
• getaliasbyname_r(3) read an alias entry
• getaliasbyname(3) read an alias entry
• getaliasent_r(3) read an alias entry
• getaliasent(3) read an alias entry
• getauxval(3) retrieve a value from the auxiliary vector
• getc_unlocked(3) nonlocking stdio functions
• getc(3) input of characters and strings
• getchar_unlocked(3) nonlocking stdio functions
• getchar(3) input of characters and strings
• getcontext(3) get or set the user context
• getcpu(2) determine CPU and NUMA node on which the calling thread is running
• getcwd(2) get current working directory
• getcwd(3) get current working directory
• getdate_err(3) convert a date-plus-time string to broken-down time
• getdate_r(3) convert a date-plus-time string to broken-down time
• getdate(3) convert a date-plus-time string to broken-down time
• getdelim(3) delimited string input
• getdents(2) get directory entries
• getdents64(2) get directory entries
• getdirentries(3) get directory entries in a filesystem-independent format
• getdomainname(2) get/set NIS domain name
• getdtablesize(3) get file descriptor table size
• getegid(2) get group identity
• getegid32(2) get group identity
• getentropy(3) fill a buffer with random bytes
• getenv(3) get an environment variable
• geteuid(2) get user identity
• geteuid32(2) get user identity
• getfsent(3) handle fstab entries
• getfsfile(3) handle fstab entries
• getfsspec(3) handle fstab entries
• getgid(2) get group identity
• getgid32(2) get group identity
• getgrent_r(3) get group file entry reentrantly
• getgrent(3) get group file entry
• getgrgid_r(3) get group file entry
• getgrgid(3) get group file entry
• getgrnam_r(3) get group file entry
• getgrnam(3) get group file entry
• getgrouplist(3) get list of groups to which a user belongs
• getgroups(2) get/set list of supplementary group IDs
• getgroups32(2) get/set list of supplementary group IDs
• gethostbyaddr_r(3) get network host entry
• gethostbyaddr(3) get network host entry
• gethostbyname_r(3) get network host entry
• gethostbyname(3) get network host entry
• gethostbyname2_r(3) get network host entry
• gethostbyname2(3) get network host entry
• gethostent_r(3) get network host entry
• gethostent(3) get network host entry
• gethostid(3) get or set the unique identifier of the current host
• gethostname(2) get/set hostname
• getifaddrs(3) get interface addresses
• getipnodebyaddr(3) get network
• getipnodebyname(3) get network
• getitimer(2) get or set value of an interval timer
• getline(3) delimited string input
• getloadavg(3) get system load averages
• getlogin_r(3) get username
• getlogin(3) get username
• getmntent_r(3) get filesystem descriptor file entry
• getmntent(3) get filesystem descriptor file entry
• getmsg(2) unimplemented system calls
• getnameinfo(3) address-to-name translation in protocol-independent manner
• getnetbyaddr_r(3) get
• getnetbyaddr(3) get network entry
• getnetbyname_r(3) get
• getnetbyname(3) get network entry
• getnetent_r(3) get
• getnetent(3) get network entry
• getnetgrent_r(3) handle network group entries
• getnetgrent(3) handle network group entries
• getopt_long_only(3) Parse command-line options
• getopt_long(3) Parse command-line options
• getopt(3) Parse command-line options
• getpagesize(2) get memory page size
• getpass(3) get a password
• getpeername(2) get name of connected peer socket
• getpgid(2) set/get process group
• getpgrp(2) set/get process group
• getpid(2) get process identification
• getpmsg(2) unimplemented system calls
• getppid(2) get process identification
• getpriority(2) get/set program scheduling priority
• getprotobyname_r(3) get
• getprotobyname(3) get protocol entry
• getprotobynumber_r(3) get
• getprotobynumber(3) get protocol entry
• getprotoent_r(3) get
• getprotoent(3) get protocol entry
• getpt(3) open a new pseudoterminal master
• getpw(3) reconstruct password line entry
• getpwent_r(3) get passwd file entry reentrantly
• getpwent(3) get password file entry
• getpwnam_r(3) get password file entry
• getpwnam(3) get password file entry
• getpwuid_r(3) get password file entry
• getpwuid(3) get password file entry
• getrandom(2) obtain a series of random bytes
• getresgid(2) get real, effective, and saved user/group IDs
• getresgid32(2) get real, effective, and saved user/group IDs
• getresuid(2) get real, effective, and saved user/group IDs
• getresuid32(2) get real, effective, and saved user/group IDs
• getrlimit(2) get/set resource limits
• getrpcbyname_r(3) get
• getrpcbyname(3) get
• getrpcbynumber_r(3) get
• getrpcbynumber(3) get
• getrpcent_r(3) get
• getrpcent(3) get
• getrpcport(3) get RPC port number
• getrusage(2) get resource usage
• gets(3) get a string from standard input (DEPRECATED)
• getservbyname_r(3) get
• getservbyname(3) get service entry
• getservbyport_r(3) get
• getservbyport(3) get service entry
• getservent_r(3) get
• getservent(3) get service entry
• getsid(2) get session ID
• getsockname(2) get socket name
• getsockopt(2) get and set options on sockets
• getspent_r(3) get shadow password file entry
• getspent(3) get shadow password file entry
• getspnam_r(3) get shadow password file entry
• getspnam(3) get shadow password file entry
• getsubopt(3) parse suboption arguments from a string
• gettid(2) get thread identification
• gettimeofday(2) get / set time
• getttyent(3) get ttys file entry
• getttynam(3) get ttys file entry
• getuid(2) get user identity
• getuid32(2) get user identity
• getunwind(2) copy the unwind data to caller's buffer
• getusershell(3) get permitted user shells
• getutent_r(3) access utmp file entries
• getutent(3) access utmp file entries
• getutid_r(3) access utmp file entries
• getutid(3) access utmp file entries
• getutline_r(3) access utmp file entries
• getutline(3) access utmp file entries
• getutmp(3) copy utmp structure to utmpx, and vice versa
• getutmpx(3) copy utmp structure to utmpx, and vice versa
• getutxent(3) access utmp file entries
• getutxid(3) access utmp file entries
• getutxline(3) access utmp file entries
• getw(3) input and output of words (ints)
• getwc_unlocked(3) nonlocking stdio functions
• getwc(3) read a wide character from a FILE stream
• getwchar_unlocked(3) nonlocking stdio functions
• getwchar(3) read a wide character from standard input
• getwd(3) get current working directory
• getxattr(2) retrieve an extended attribute value
• glob(3) find pathnames matching a pattern, free memory from glob()
• globfree(3) find pathnames matching a pattern, free memory from glob()
• gmtime_r(3) transform date and time to broken-down time or ASCII
• gmtime(3) transform date and time to broken-down time or ASCII
• gnu_dev_major(3) manage a device number
• gnu_dev_makedev(3) manage a device number
• gnu_dev_minor(3) manage a device number
• gnu_get_libc_release(3) get glibc version and release
• gnu_get_libc_version(3) get glibc version and release
• grantpt(3) grant access to the slave pseudoterminal
• group_member(3) test whether a process is in a group
• gsignal(3) software signal facility
• gtty(2) unimplemented system calls
• h_errno(3) get network host entry
• hash(3) hash database access method
• hasmntopt(3) get filesystem descriptor file entry
• hcreate_r(3) hash table management
• hcreate(3) hash table management
• hdestroy_r(3) hash table management
• hdestroy(3) hash table management
• herror(3) get network host entry
• hsearch_r(3) hash table management
• hsearch(3) hash table management
• hstrerror(3) get network host entry
• htobe16(3) convert values between host and big-/little-endian byte order
• htobe32(3) convert values between host and big-/little-endian byte order
• htobe64(3) convert values between host and big-/little-endian byte order
• htole16(3) convert values between host and big-/little-endian byte order
• htole32(3) convert values between host and big-/little-endian byte order
• htole64(3) convert values between host and big-/little-endian byte order
• htonl(3) convert values between host and network
• htons(3) convert values between host and network
• HUGE_VAL(3) floating-point constants
• HUGE_VALF(3) floating-point constants
• HUGE_VALL(3) floating-point constants
• hypot(3) Euclidean distance function
• hypotf(3) Euclidean distance function
• hypotl(3) Euclidean distance function
• iconv_close(3) deallocate descriptor for character set conversion
• iconv_open(3) allocate descriptor for character set conversion
• iconv(3) perform character set conversion
• idle(2) make process 0 idle
• if_freenameindex(3) get network interface names and indexes
• if_indextoname(3) mappings between network interface
• if_nameindex(3) get network interface names and indexes
• if_nametoindex(3) mappings between network interface
• ilogb(3) get integer exponent of a floating-point value
• ilogbf(3) get integer exponent of a floating-point value
• ilogbl(3) get integer exponent of a floating-point value
• imaxabs(3) compute the absolute value of an integer
• imaxdiv(3) compute quotient and remainder of
• inb_p(2) port I/O
• inb(2) port I/O
• index(3) locate character in string
• inet_addr(3) Internet address manipulation routines
• inet_aton(3) Internet address manipulation routines
• inet_lnaof(3) Internet address manipulation routines
• inet_makeaddr(3) Internet address manipulation routines
• inet_net_ntop(3) Internet network number conversion
• inet_net_pton(3) Internet network number conversion
• inet_netof(3) Internet address manipulation routines
• inet_network(3) Internet address manipulation routines
• inet_ntoa(3) Internet address manipulation routines
• inet_ntop(3) convert IPv4 and IPv6 addresses from binary to text form
• inet_pton(3) convert IPv4 and IPv6 addresses from text to binary form
• inet(3) Internet address manipulation routines
• INFINITY(3) floating-point constants
• init_module(2) load a kernel module
• initgroups(3) initialize the supplementary group access list
• initstate_r(3) reentrant
• initstate(3) random number generator
• inl_p(2) port I/O
• inl(2) port I/O
• innetgr(3) handle network group entries
• inotify_add_watch(2) add a watch to an initialized inotify instance
• inotify_init(2) initialize an inotify instance
• inotify_init1(2) initialize an inotify instance
• inotify_rm_watch(2) remove an existing watch from an inotify instance
• insb(2) port I/O
• insl(2) port I/O
• insque(3) insert/remove an item from a queue
• insw(2) port I/O
• inw_p(2) port I/O
• inw(2) port I/O
• io_cancel(2) cancel an outstanding asynchronous I/O operation
• io_destroy(2) destroy an asynchronous I/O context
• io_getevents(2) read asynchronous I/O events from the completion queue
• io_setup(2) create an asynchronous I/O context
• io_submit(2) submit asynchronous I/O blocks for processing
• ioctl_console(2) ioctls for console terminal and virtual consoles
• ioctl_fat(2) manipulating the FAT filesystem
• ioctl_ficlone(2) share some the data of one file with another file
• ioctl_ficlonerange(2) share some the data of one file with another file
• ioctl_fideduperange(2) share some the data of one file with another file
• ioctl_fslabel(2) get or set a filesystem label
• ioctl_getfsmap(2) retrieve the physical layout of the filesystem
• ioctl_iflags(2) ioctl() operations for inode flags
• ioctl_ns(2) ioctl() operations for Linux namespaces
• ioctl_tty(2) ioctls for terminals and serial lines
• ioctl_userfaultfd(2) create a file descriptor for handling page faults in user
• ioctl(2) control device
• ioperm(2) set port input/output permissions
• iopl(2) change I/O privilege level
• ioprio_get(2) get/set I/O scheduling class and priority
• ioprio_set(2) get/set I/O scheduling class and priority
• ipc(2) System V IPC system calls
• iruserok_af(3) routines for returning a
• iruserok(3) routines for returning a
• isalnum_l(3) character classification functions
• isalnum(3) character classification functions
• isalpha_l(3) character classification functions
• isalpha(3) character classification functions
• isascii_l(3) character classification functions
• isascii(3) character classification functions
• isastream(2) unimplemented system calls
• isatty(3) test whether a file descriptor refers to a terminal
• isblank_l(3) character classification functions
• isblank(3) character classification functions
• iscntrl_l(3) character classification functions
• iscntrl(3) character classification functions
• isdigit_l(3) character classification functions
• isdigit(3) character classification functions
• isfdtype(3) test file type of a file descriptor
• isfinite(3) floating-point
• isgraph_l(3) character classification functions
• isgraph(3) character classification functions
• isgreater(3) floating-point relational tests without exception for NaN
• isgreaterequal(3) floating-point relational tests without exception for NaN
• isinf(3) floating-point
• isinff(3) BSD floating-point classification functions
• isinfl(3) BSD floating-point classification functions
• isless(3) floating-point relational tests without exception for NaN
• islessequal(3) floating-point relational tests without exception for NaN
• islessgreater(3) floating-point relational tests without exception for NaN
• islower_l(3) character classification functions
• islower(3) character classification functions
• isnan(3) floating-point
• isnanf(3) BSD floating-point classification functions
• isnanl(3) BSD floating-point classification functions
• isnormal(3) floating-point
• isprint_l(3) character classification functions
• isprint(3) character classification functions
• ispunct_l(3) character classification functions
• ispunct(3) character classification functions
• isspace_l(3) character classification functions
• isspace(3) character classification functions
• isunordered(3) floating-point relational tests without exception for NaN
• isupper_l(3) character classification functions
• isupper(3) character classification functions
• iswalnum(3) test for alphanumeric wide character
• iswalpha(3) test for alphabetic wide character
• iswblank(3) test for whitespace wide character
• iswcntrl(3) test for control wide character
• iswctype(3) wide-character classification
• iswdigit(3) test for decimal digit wide character
• iswgraph(3) test for graphic wide character
• iswlower(3) test for lowercase wide character
• iswprint(3) test for printing wide character
• iswpunct(3) test for punctuation or symbolic wide character
• iswspace(3) test for whitespace wide character
• iswupper(3) test for uppercase wide character
• iswxdigit(3) test for hexadecimal digit wide character
• isxdigit_l(3) character classification functions
• isxdigit(3) character classification functions
• j0(3) Bessel functions of the first kind
• j0f(3) Bessel functions of the first kind
• j0l(3) Bessel functions of the first kind
• j1(3) Bessel functions of the first kind
• jn(3) Bessel functions of the first kind
• jnf(3) Bessel functions of the first kind
• jnl(3) Bessel functions of the first kind
• jrand48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• jrand48(3) generate uniformly distributed pseudo-random numbers
• kcmp(2) compare two processes to determine if they share a kernel resource
• kexec_file_load(2) load a new kernel for later execution
• kexec_load(2) load a new kernel for later execution
• key_decryptsession(3) interfaces to rpc keyserver daemon
• key_encryptsession(3) interfaces to rpc keyserver daemon
• key_gendes(3) interfaces to rpc keyserver daemon
• key_secretkey_is_set(3) interfaces to rpc keyserver daemon
• key_setsecret(3) interfaces to rpc keyserver daemon
• keyctl(2) manipulate the kernel's key management facility
• kill(2) send signal to a process
• killpg(3) send signal to a process group
• klogctl(3) read and/or clear kernel message ring buffer;
• l64a(3) convert between long and base-64
• labs(3) compute the absolute value of an integer
• landlock_add_rule(2) add a new Landlock rule to a ruleset
• landlock_create_ruleset(2) create a new Landlock ruleset
• landlock_restrict_self(2) enforce a Landlock ruleset
• lchown(2) change ownership of a file
• lchown32(2) change ownership of a file
• lckpwdf(3) get shadow password file entry
• lcong48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• lcong48(3) generate uniformly distributed pseudo-random numbers
• ldexp(3) multiply floating-point number by integral power of 2
• ldexpf(3) multiply floating-point number by integral power of 2
• ldexpl(3) multiply floating-point number by integral power of 2
• ldiv(3) compute quotient and remainder of
• le16toh(3) convert values between host and big-/little-endian byte order
• le32toh(3) convert values between host and big-/little-endian byte order
• le64toh(3) convert values between host and big-/little-endian byte order
• lfind(3) linear search of an array
• lgamma_r(3) log gamma function
• lgamma(3) log gamma function
• lgammaf_r(3) log gamma function
• lgammaf(3) log gamma function
• lgammal_r(3) log gamma function
• lgammal(3) log gamma function
• lgetxattr(2) retrieve an extended attribute value
• link(2) make a new name for a file
• linkat(2) make a new name for a file
• lio_listio(3) initiate a list of I/O requests
• LIST_EMPTY(3) implementation of a doubly linked list
• LIST_ENTRY(3) implementation of a doubly linked list
• LIST_FIRST(3) implementation of a doubly linked list
• LIST_FOREACH(3) implementation of a doubly linked list
• LIST_HEAD_INITIALIZER(3) implementation of a doubly linked list
• LIST_HEAD(3) implementation of a doubly linked list
• LIST_INIT(3) implementation of a doubly linked list
• LIST_INSERT_AFTER(3) implementation of a doubly linked list
• LIST_INSERT_BEFORE(3) implementation of a doubly linked list
• LIST_INSERT_HEAD(3) implementation of a doubly linked list
• LIST_NEXT(3) implementation of a doubly linked list
• LIST_REMOVE(3) implementation of a doubly linked list
• list(3) implementation of a doubly linked list
• listen(2) listen for connections on a socket
• listxattr(2) list extended attribute names
• llabs(3) compute the absolute value of an integer
• lldiv(3) compute quotient and remainder of
• llistxattr(2) list extended attribute names
• llrint(3) round to nearest integer
• llrintf(3) round to nearest integer
• llrintl(3) round to nearest integer
• llround(3) round to
• llroundf(3) round to
• llroundl(3) round to
• llseek(2) reposition read/write file offset
• localeconv(3) get numeric formatting information
• localtime_r(3) transform date and time to broken-down time or ASCII
• localtime(3) transform date and time to broken-down time or ASCII
• lock(2) unimplemented system calls
• lockf(3) apply, test or remove a POSIX lock on an open file
• log(3) natural logarithmic function
• log10(3) base-10 logarithmic function
• log10f(3) base-10 logarithmic function
• log10l(3) base-10 logarithmic function
• log1p(3) logarithm of 1 plus argument
• log1pf(3) logarithm of 1 plus argument
• log1pl(3) logarithm of 1 plus argument
• log2(3) base-2 logarithmic function
• log2f(3) base-2 logarithmic function
• log2l(3) base-2 logarithmic function
• logb(3) get exponent of a floating-point value
• logbf(3) get exponent of a floating-point value
• logbl(3) get exponent of a floating-point value
• logf(3) natural logarithmic function
• login_tty(3) terminal utility functions
• login(3) write utmp and wtmp entries
• logl(3) natural logarithmic function
• logout(3) write utmp and wtmp entries
• logwtmp(3) append an entry to the wtmp file
• longjmp(3) performing a nonlocal goto
• lookup_dcookie(2) return a directory entry's path
• lrand48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• lrand48(3) generate uniformly distributed pseudo-random numbers
• lremovexattr(2) remove an extended attribute
• lrint(3) round to nearest integer
• lrintf(3) round to nearest integer
• lrintl(3) round to nearest integer
• lround(3) round to
• lroundf(3) round to
• lroundl(3) round to
• lsearch(3) linear search of an array
• lseek(2) reposition read/write file offset
• lseek64(3) reposition 64-bit read/write file offset
• lsetxattr(2) set an extended attribute value
• lstat(2) get file status
• lstat64(2) get file status
• lutimes(3) change file timestamps
• madvise(2) give advice about use of memory
• madvise1(2) unimplemented system calls
• major(3) manage a device number
• makecontext(3) manipulate user context
• makedev(3) manage a device number
• mallinfo(3) obtain memory allocation information
• mallinfo2(3) obtain memory allocation information
• malloc_get_state(3) record and restore state of malloc implementation
• malloc_hook(3) malloc debugging variables (DEPRECATED)
• malloc_info(3) export malloc state to a stream
• malloc_set_state(3) record and restore state of malloc implementation
• malloc_stats(3) print memory allocation statistics
• malloc_trim(3) release free memory from the heap
• malloc_usable_size(3) obtain size of block of memory allocated from heap
• malloc(3) allocate and free dynamic memory
• mallopt(3) set memory allocation parameters
• matherr(3) SVID math library exception handling
• MAX(3) maximum or minimum of two values
• MB_CUR_MAX(3) maximum length of a multibyte character in the current locale
• MB_LEN_MAX(3) maximum multibyte length of a character across all locales
• mbind(2) set memory policy for a memory range
• mblen(3) determine number of bytes in next multibyte character
• mbrlen(3) determine number of bytes in next multibyte character
• mbrtowc(3) convert a multibyte sequence to a wide character
• mbsinit(3) test for initial shift state
• mbsnrtowcs(3) convert a multibyte string to a wide-character string
• mbsrtowcs(3) convert a multibyte string to a wide-character string
• mbstowcs(3) convert a multibyte string to a wide-character string
• mbtowc(3) convert a multibyte sequence to a wide character
• mcheck_check_all(3) heap consistency checking
• mcheck_pedantic(3) heap consistency checking
• mcheck(3) heap consistency checking
• memalign(3) allocate aligned memory
• membarrier(2) issue memory barriers on a set of threads
• memccpy(3) copy memory area
• memchr(3) scan memory for a character
• memcmp(3) compare memory areas
• memcpy(3) copy memory area
• memfd_create(2) create an anonymous file
• memfd_secret(2) create an anonymous RAM-based file
• memfrob(3) frobnicate (obfuscate) a memory area
• memmem(3) locate a substring
• memmove(3) copy memory area
• mempcpy(3) copy memory area
• memrchr(3) scan memory for a character
• memset(3) fill memory with a constant byte
• migrate_pages(2) move all pages in a process to another set of nodes
• MIN(3) maximum or minimum of two values
• mincore(2) determine whether pages are resident in memory
• minor(3) manage a device number
• mkdir(2) create a directory
• mkdirat(2) create a directory
• mkdtemp(3) create a unique temporary directory
• mkfifo(3) make a FIFO special file (a named pipe)
• mkfifoat(3) make a FIFO special file (a named pipe)
• mknod(2) create a special or ordinary file
• mknodat(2) create a special or ordinary file
• mkostemp(3) create a unique temporary file
• mkostemps(3) create a unique temporary file
• mkstemp(3) create a unique temporary file
• mkstemps(3) create a unique temporary file
• mktemp(3) make a unique temporary filename
• mktime(3) transform date and time to broken-down time or ASCII
• mlock(2) lock and unlock memory
• mlock2(2) lock and unlock memory
• mlockall(2) lock and unlock memory
• mmap(2) map or unmap files or devices into memory
• mmap2(2) map files or devices into memory
• mmap64(3) map or unmap files or devices into memory
• modf(3) extract signed integral and fractional values from
• modff(3) extract signed integral and fractional values from
• modfl(3) extract signed integral and fractional values from
• modify_ldt(2) get or set a per-process LDT entry
• mount_setattr(2) change properties of a mount or mount tree
• mount(2) mount filesystem
• move_pages(2) move individual pages of a process to another node
• mpool(3) shared memory buffer pool
• mprobe(3) heap consistency checking
• mprotect(2) set protection on a region of memory
• mpx(2) unimplemented system calls
• mq_close(3) close a message queue descriptor
• mq_getattr(3) get/set message queue attributes
• mq_getsetattr(2) get/set message queue attributes
• mq_notify(2) register for notification when a message is available
• mq_notify(3) register for notification when a message is available
• mq_open(2) open a message queue
• mq_open(3) open a message queue
• mq_receive(3) receive a message from a message queue
• mq_send(3) send a message to a message queue
• mq_setattr(3) get/set message queue attributes
• mq_timedreceive(2) receive a message from a message queue
• mq_timedreceive(3) receive a message from a message queue
• mq_timedsend(2) send a message to a message queue
• mq_timedsend(3) send a message to a message queue
• mq_unlink(2) remove a message queue
• mq_unlink(3) remove a message queue
• mrand48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• mrand48(3) generate uniformly distributed pseudo-random numbers
• mremap(2) remap a virtual memory address
• msgctl(2) System V message control operations
• msgget(2) get a System V message queue identifier
• msgop(2) System V message queue operations
• msgrcv(2) System V message queue operations
• msgsnd(2) System V message queue operations
• msync(2) synchronize a file with a memory map
• mtrace(3) malloc tracing
• munlock(2) lock and unlock memory
• munlockall(2) lock and unlock memory
• munmap(2) map or unmap files or devices into memory
• muntrace(3) malloc tracing
• name_to_handle_at(2) obtain handle
• nan(3) return 'Not a Number'
• nanf(3) return 'Not a Number'
• nanl(3) return 'Not a Number'
• nanosleep(2) high-resolution sleep
• nearbyint(3) round
• nearbyintf(3) round
• nearbyintl(3) round
• netlink(3) Netlink macros
• newfstatat(2) get file status
• newlocale(3) create, modify, and free a locale object
• nextafter(3) floating-point number manipulation
• nextafterf(3) floating-point number manipulation
• nextafterl(3) floating-point number manipulation
• nextdown(3) return next floating-point number toward positive/negative infinity
• nextdownf(3) return next floating-point number toward positive/negative infinity
• nextdownl(3) return next floating-point number toward positive/negative infinity
• nexttoward(3) floating-point number manipulation
• nexttowardf(3) floating-point number manipulation
• nexttowardl(3) floating-point number manipulation
• nextup(3) return next floating-point number toward positive/negative infinity
• nextupf(3) return next floating-point number toward positive/negative infinity
• nextupl(3) return next floating-point number toward positive/negative infinity
• nfsservctl(2) syscall interface to kernel nfs daemon
• nftw(3) file tree walk
• nice(2) change process priority
• nl_langinfo_l(3) query language and locale information
• nl_langinfo(3) query language and locale information
• nrand48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• nrand48(3) generate uniformly distributed pseudo-random numbers
• ntohl(3) convert values between host and network
• ntohs(3) convert values between host and network
• ntp_adjtime(3) tune kernel clock
• ntp_gettime(3) get time parameters (NTP daemon interface)
• ntp_gettimex(3) get time parameters (NTP daemon interface)
• offsetof(3) offset of a structure member
• oldfstat(2) get file status
• oldlstat(2) get file status
• oldolduname(2) get name and information about current kernel
• oldstat(2) get file status
• olduname(2) get name and information about current kernel
• on_exit(3) register a function to be called at normal process termination
• open_by_handle_at(2) obtain handle
• open_memstream(3) open a dynamic memory buffer stream
• open_wmemstream(3) open a dynamic memory buffer stream
• open(2) open and possibly create a file
• openat(2) open and possibly create a file
• openat2(2) open and possibly create a file (extended)
• opendir(3) open a directory
• openlog(3) send messages to the system logger
• openpty(3) terminal utility functions
• optarg(3) Parse command-line options
• opterr(3) Parse command-line options
• optind(3) Parse command-line options
• optopt(3) Parse command-line options
• outb_p(2) port I/O
• outb(2) port I/O
• outl_p(2) port I/O
• outl(2) port I/O
• outsb(2) port I/O
• outsl(2) port I/O
• outsw(2) port I/O
• outw_p(2) port I/O
• outw(2) port I/O
• passwd2des(3) RFS password encryption
• pathconf(3) get configuration values for files
• pause(2) wait for signal
• pciconfig_iobase(2) pci device information handling
• pciconfig_read(2) pci device information handling
• pciconfig_write(2) pci device information handling
• pclose(3) pipe stream to or from a process
• perf_event_open(2) set up performance monitoring
• perfmonctl(2) interface to IA-64 performance monitoring unit
• perror(3) print a system error message
• personality(2) set the process execution domain
• phys(2) unimplemented system calls
• pidfd_getfd(2) obtain a duplicate of another process's file descriptor
• pidfd_open(2) obtain a file descriptor that refers to a process
• pidfd_send_signal(2) send a signal to a process specified by a file descriptor
• pipe(2) create pipe
• pipe2(2) create pipe
• pivot_root(2) change the root mount
• pkey_alloc(2) allocate or free a protection key
• pkey_free(2) allocate or free a protection key
• pkey_mprotect(2) set protection on a region of memory
• pmap_getmaps(3) library routines for remote procedure calls
• pmap_getport(3) library routines for remote procedure calls
• pmap_rmtcall(3) library routines for remote procedure calls
• pmap_set(3) library routines for remote procedure calls
• pmap_unset(3) library routines for remote procedure calls
• poll(2) wait for some event on a file descriptor
• popen(3) pipe stream to or from a process
• posix_fadvise(2) predeclare an access pattern for file data
• posix_fallocate(3) allocate file space
• posix_madvise(3) give advice about patterns of memory usage
• posix_memalign(3) allocate aligned memory
• posix_openpt(3) open a pseudoterminal device
• posix_spawn(3) spawn a process
• posix_spawnp(3) spawn a process
• pow(3) power functions
• pow10(3) base-10 power functions
• pow10f(3) base-10 power functions
• pow10l(3) base-10 power functions
• powerof2(3) test if a value is a power of 2
• powf(3) power functions
• powl(3) power functions
• ppoll(2) wait for some event on a file descriptor
• prctl(2) operations on a process or thread
• pread(2) read from or write to a file descriptor at a given offset
• pread64(2) read from or write to a file descriptor at a given offset
• preadv(2) read or write data into multiple buffers
• preadv2(2) read or write data into multiple buffers
• printf(3) formatted output conversion
• prlimit(2) get/set resource limits
• prlimit64(2) get/set resource limits
• process_madvise(2) give advice about use of memory to a process
• process_vm_readv(2) transfer data between process address spaces
• process_vm_writev(2) transfer data between process address spaces
• prof(2) unimplemented system calls
• profil(3) execution time profile
• program_invocation_name(3) \
• program_invocation_short_name(3) \
• pselect(2) synchronous I/O multiplexing
• pselect6(2) synchronous I/O multiplexing
• psiginfo(3) print signal description
• psignal(3) print signal description
• pthread_attr_destroy(3) initialize and destroy
• pthread_attr_getaffinity_np(3) set/get
• pthread_attr_getdetachstate(3) set/get detach state attribute in thread attributes object
• pthread_attr_getguardsize(3) set/get guard size
• pthread_attr_getinheritsched(3) set/get
• pthread_attr_getschedparam(3) set/get
• pthread_attr_getschedpolicy(3) set/get
• pthread_attr_getscope(3) set/get contention scope
• pthread_attr_getsigmask_np(3) set/get
• pthread_attr_getstack(3) set/get stack
• pthread_attr_getstackaddr(3) set/get stack address attribute in thread attributes object
• pthread_attr_getstacksize(3) set/get stack size
• pthread_attr_init(3) initialize and destroy
• pthread_attr_setaffinity_np(3) set/get
• pthread_attr_setdetachstate(3) set/get detach state attribute in thread attributes object
• pthread_attr_setguardsize(3) set/get guard size
• pthread_attr_setinheritsched(3) set/get
• pthread_attr_setschedparam(3) set/get
• pthread_attr_setschedpolicy(3) set/get
• pthread_attr_setscope(3) set/get contention scope
• pthread_attr_setsigmask_np(3) set/get
• pthread_attr_setstack(3) set/get stack
• pthread_attr_setstackaddr(3) set/get stack address attribute in thread attributes object
• pthread_attr_setstacksize(3) set/get stack size
• pthread_cancel(3) send a cancelation request to a thread
• pthread_cleanup_pop_restore_np(3) push and pop
• pthread_cleanup_pop(3) push and pop
• pthread_cleanup_push_defer_np(3) push and pop
• pthread_cleanup_push(3) push and pop
• pthread_create(3) create a new thread
• pthread_detach(3) detach a thread
• pthread_equal(3) compare thread IDs
• pthread_exit(3) terminate calling thread
• pthread_getaffinity_np(3) set/get
• pthread_getattr_default_np(3) get or set default thread-creation attributes
• pthread_getattr_np(3) get attributes of created thread
• pthread_getconcurrency(3) set/get
• pthread_getcpuclockid(3) retrieve ID of a thread's CPU time clock
• pthread_getname_np(3) set/get the name of a thread
• pthread_getschedparam(3) set/get
• pthread_join(3) join with a terminated thread
• pthread_kill_other_threads_np(3) terminate all other threads in process
• pthread_kill(3) send a signal to a thread
• pthread_mutex_consistent_np(3) make a robust mutex consistent
• pthread_mutex_consistent(3) make a robust mutex consistent
• pthread_mutexattr_getpshared(3) get/set
• pthread_mutexattr_getrobust_np(3) get and set the robustness attribute of a mutex attributes object
• pthread_mutexattr_getrobust(3) get and set the robustness attribute of a mutex attributes object
• pthread_mutexattr_setpshared(3) get/set
• pthread_mutexattr_setrobust_np(3) get and set the robustness attribute of a mutex attributes object
• pthread_mutexattr_setrobust(3) get and set the robustness attribute of a mutex attributes object
• pthread_rwlockattr_getkind_np(3) set/get
• pthread_rwlockattr_setkind_np(3) set/get
• pthread_self(3) obtain ID of the calling thread
• pthread_setaffinity_np(3) set/get
• pthread_setattr_default_np(3) get or set default thread-creation attributes
• pthread_setcancelstate(3) set cancelability state and type
• pthread_setcanceltype(3) set cancelability state and type
• pthread_setconcurrency(3) set/get
• pthread_setname_np(3) set/get the name of a thread
• pthread_setschedparam(3) set/get
• pthread_setschedprio(3) set scheduling priority of a thread
• pthread_sigmask(3) examine and change mask of blocked signals
• pthread_sigqueue(3) queue a signal and data to a thread
• pthread_spin_destroy(3) initialize or destroy a spin lock
• pthread_spin_init(3) initialize or destroy a spin lock
• pthread_spin_lock(3) lock and unlock a spin lock
• pthread_spin_trylock(3) lock and unlock a spin lock
• pthread_spin_unlock(3) lock and unlock a spin lock
• pthread_testcancel(3) request delivery of any pending cancelation request
• pthread_timedjoin_np(3) try to join with a
• pthread_tryjoin_np(3) try to join with a
• pthread_yield(3) yield the processor
• ptrace(2) process trace
• ptsname_r(3) get the name of the slave pseudoterminal
• ptsname(3) get the name of the slave pseudoterminal
• putc_unlocked(3) nonlocking stdio functions
• putc(3) output of characters and strings
• putchar_unlocked(3) nonlocking stdio functions
• putchar(3) output of characters and strings
• putenv(3) change or add an environment variable
• putgrent(3) write a group database entry to a file
• putmsg(2) unimplemented system calls
• putpmsg(2) unimplemented system calls
• putpwent(3) write a password file entry
• puts(3) output of characters and strings
• putspent(3) get shadow password file entry
• pututline(3) access utmp file entries
• pututxline(3) access utmp file entries
• putw(3) input and output of words (ints)
• putwc_unlocked(3) nonlocking stdio functions
• putwc(3) write a wide character to a FILE stream
• putwchar_unlocked(3) nonlocking stdio functions
• putwchar(3) write a wide character to standard output
• pvalloc(3) allocate aligned memory
• pwrite(2) read from or write to a file descriptor at a given offset
• pwrite64(2) read from or write to a file descriptor at a given offset
• pwritev(2) read or write data into multiple buffers
• pwritev2(2) read or write data into multiple buffers
• qecvt_r(3) convert a floating-point number to a string
• qecvt(3) convert a floating-point number to a string
• qfcvt_r(3) convert a floating-point number to a string
• qfcvt(3) convert a floating-point number to a string
• qgcvt(3) convert a floating-point number to a string
• qsort_r(3) sort an array
• qsort(3) sort an array
• query_module(2) query the kernel for various bits pertaining to modules
• quotactl(2) manipulate disk quotas
• raise(3) send a signal to the caller
• rand_r(3) pseudo-random number generator
• rand(3) pseudo-random number generator
• random_r(3) reentrant
• random(3) random number generator
• rawmemchr(3) scan memory for a character
• rcmd_af(3) routines for returning a
• rcmd(3) routines for returning a
• re_comp(3) BSD regex functions
• re_exec(3) BSD regex functions
• read(2) read from a file descriptor
• readahead(2) initiate file readahead into page cache
• readdir_r(3) read a directory
• readdir(2) read directory entry
• readdir(3) read a directory
• readlink(2) read value of a symbolic link
• readlinkat(2) read value of a symbolic link
• readv(2) read or write data into multiple buffers
• realloc(3) allocate and free dynamic memory
• reallocarray(3) allocate and free dynamic memory
• realpath(3) return the canonicalized absolute pathname
• reboot(2) reboot or enable/disable Ctrl-Alt-Del
• recno(3) record number database access method
• recv(2) receive a message from a socket
• recvfrom(2) receive a message from a socket
• recvmmsg(2) receive multiple messages on a socket
• recvmsg(2) receive a message from a socket
• regcomp(3) POSIX regex functions
• regerror(3) POSIX regex functions
• regex(3) POSIX regex functions
• regexec(3) POSIX regex functions
• regfree(3) POSIX regex functions
• register_printf_modifier(3) define custom behavior for printf-like functions
• register_printf_specifier(3) define custom behavior for printf-like functions
• register_printf_type(3) define custom behavior for printf-like functions
• registerrpc(3) library routines for remote procedure calls
• remainder(3) \
• remainderf(3) \
• remainderl(3) \
• remap_file_pages(2) create a nonlinear file mapping
• remove(3) remove a file or directory
• removexattr(2) remove an extended attribute
• remque(3) insert/remove an item from a queue
• remquo(3) remainder and part of quotient
• remquof(3) remainder and part of quotient
• remquol(3) remainder and part of quotient
• rename(2) change the name or location of a file
• renameat(2) change the name or location of a file
• renameat2(2) change the name or location of a file
• request_key(2) request a key from the kernel's key management facility
• res_init(3) resolver routines
• res_mkquery(3) resolver routines
• res_nclose(3) resolver routines
• res_ninit(3) resolver routines
• res_nmkquery(3) resolver routines
• res_nquery(3) resolver routines
• res_nquerydomain(3) resolver routines
• res_nsearch(3) resolver routines
• res_nsend(3) resolver routines
• res_query(3) resolver routines
• res_querydomain(3) resolver routines
• res_search(3) resolver routines
• res_send(3) resolver routines
• resolver(3) resolver routines
• restart_syscall(2) restart a system call after interruption by a stop signal
• rewind(3) reposition a stream
• rewinddir(3) reset directory stream
• rexec_af(3) return stream to a remote command
• rexec(3) return stream to a remote command
• rindex(3) locate character in string
• rint(3) round
• rintf(3) round
• rintl(3) round
• rmdir(2) delete a directory
• round(3) round to nearest integer, away from zero
• roundf(3) round to nearest integer, away from zero
• roundl(3) round to nearest integer, away from zero
• roundup(3) round up in steps
• rpc(3) library routines for remote procedure calls
• rpmatch(3) determine if the answer to a question is affirmative or negative
• rresvport_af(3) routines for returning a
• rresvport(3) routines for returning a
• rt_sigaction(2) examine and change a signal action
• rt_sigpending(2) examine pending signals
• rt_sigprocmask(2) examine and change blocked signals
• rt_sigqueueinfo(2) queue a signal and data
• rt_sigreturn(2) return from signal handler and cleanup stack frame
• rt_sigsuspend(2) wait for a signal
• rt_sigtimedwait(2) synchronously wait
• rt_tgsigqueueinfo(2) queue a signal and data
• rtime(3) get time from a remote machine
• rtnetlink(3) macros to manipulate rtnetlink messages
• ruserok_af(3) routines for returning a
• ruserok(3) routines for returning a
• s390_guarded_storage(2) operations with z/Architecture guarded storage facility
• s390_pci_mmio_read(2) transfer data to/from PCI
• s390_pci_mmio_write(2) transfer data to/from PCI
• s390_runtime_instr(2) enable/disable s390 CPU run-time instrumentation
• s390_sthyi(2) emulate STHYI instruction
• sbrk(2) change data segment size
• scalb(3) multiply floating-point number
• scalbf(3) multiply floating-point number
• scalbl(3) multiply floating-point number
• scalbln(3) multiply floating-point number by integral power of radix
• scalblnf(3) multiply floating-point number by integral power of radix
• scalblnl(3) multiply floating-point number by integral power of radix
• scalbn(3) multiply floating-point number by integral power of radix
• scalbnf(3) multiply floating-point number by integral power of radix
• scalbnl(3) multiply floating-point number by integral power of radix
• scandir(3) scan
• scandirat(3) scan
• scanf(3) input FILE format conversion
• sched_get_priority_max(2) get static priority range
• sched_get_priority_min(2) get static priority range
• sched_getaffinity(2) \
• sched_getattr(2) set and get scheduling policy and attributes
• sched_getcpu(3) determine CPU on which the calling thread is running
• sched_getparam(2) set and get scheduling parameters
• sched_getscheduler(2) set and get scheduling policy/parameters
• sched_rr_get_interval(2) get the SCHED_RR interval for the named process
• sched_setaffinity(2) \
• sched_setattr(2) set and get scheduling policy and attributes
• sched_setparam(2) set and get scheduling parameters
• sched_setscheduler(2) set and get scheduling policy/parameters
• sched_yield(2) yield the processor
• seccomp_unotify(2) Seccomp user-space notification mechanism
• seccomp(2) operate on Secure Computing state of the process
• secure_getenv(3) get an environment variable
• security(2) unimplemented system calls
• seed48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• seed48(3) generate uniformly distributed pseudo-random numbers
• seekdir(3) set the position of the next readdir() call in the directory
• select_tut(2) synchronous I/O multiplexing
• select(2) synchronous I/O multiplexing
• sem_close(3) close a named semaphore
• sem_destroy(3) destroy an unnamed semaphore
• sem_getvalue(3) get the value of a semaphore
• sem_init(3) initialize an unnamed semaphore
• sem_open(3) initialize and open a named semaphore
• sem_post(3) unlock a semaphore
• sem_timedwait(3) lock a semaphore
• sem_trywait(3) lock a semaphore
• sem_unlink(3) remove a named semaphore
• sem_wait(3) lock a semaphore
• semctl(2) System V semaphore control operations
• semget(2) get a System V semaphore set identifier
• semop(2) System V semaphore operations
• semtimedop(2) System V semaphore operations
• send(2) send a message on a socket
• sendfile(2) transfer data between file descriptors
• sendfile64(2) transfer data between file descriptors
• sendmmsg(2) send multiple messages on a socket
• sendmsg(2) send a message on a socket
• sendto(2) send a message on a socket
• set_mempolicy(2) set default NUMA memory policy for a thread and its children
• set_robust_list(2) get/set list of robust futexes
• set_thread_area(2) manipulate thread-local storage information
• set_tid_address(2) set pointer to thread ID
• setaliasent(3) read an alias entry
• setbuf(3) stream buffering operations
• setbuffer(3) stream buffering operations
• setcontext(3) get or set the user context
• setdomainname(2) get/set NIS domain name
• setegid(2) set effective user or group ID
• setenv(3) change or add an environment variable
• seteuid(2) set effective user or group ID
• setfsent(3) handle fstab entries
• setfsgid(2) set group identity used for filesystem checks
• setfsgid32(2) set group identity used for filesystem checks
• setfsuid(2) set user identity used for filesystem checks
• setfsuid32(2) set user identity used for filesystem checks
• setgid(2) set group identity
• setgid32(2) set group identity
• setgrent(3) get group file entry
• setgroups(2) get/set list of supplementary group IDs
• setgroups32(2) get/set list of supplementary group IDs
• sethostent(3) get network host entry
• sethostid(3) get or set the unique identifier of the current host
• sethostname(2) get/set hostname
• setitimer(2) get or set value of an interval timer
• setjmp(3) performing a nonlocal goto
• setkey_r(3) encrypt 64-bit messages
• setkey(3) encrypt 64-bit messages
• setlinebuf(3) stream buffering operations
• setlocale(3) set the current locale
• setlogmask(3) set log priority mask
• setmntent(3) get filesystem descriptor file entry
• setnetent(3) get network entry
• setnetgrent(3) handle network group entries
• setns(2) reassociate thread with a namespace
• setpgid(2) set/get process group
• setpgrp(2) set/get process group
• setpriority(2) get/set program scheduling priority
• setprotoent(3) get protocol entry
• setpwent(3) get password file entry
• setregid(2) set real and/or effective user or group ID
• setregid32(2) set real and/or effective user or group ID
• setresgid(2) set real, effective, and saved user or group ID
• setresgid32(2) set real, effective, and saved user or group ID
• setresuid(2) set real, effective, and saved user or group ID
• setresuid32(2) set real, effective, and saved user or group ID
• setreuid(2) set real and/or effective user or group ID
• setreuid32(2) set real and/or effective user or group ID
• setrlimit(2) get/set resource limits
• setrpcent(3) get
• setservent(3) get service entry
• setsid(2) creates a session and sets the process group ID
• setsockopt(2) get and set options on sockets
• setspent(3) get shadow password file entry
• setstate_r(3) reentrant
• setstate(3) random number generator
• settimeofday(2) get / set time
• setttyent(3) get ttys file entry
• setuid(2) set user identity
• setuid32(2) set user identity
• setup(2) setup devices and filesystems, mount root filesystem
• setusershell(3) get permitted user shells
• setutent(3) access utmp file entries
• setutxent(3) access utmp file entries
• setvbuf(3) stream buffering operations
• setxattr(2) set an extended attribute value
• sgetmask(2) manipulation of signal mask (obsolete)
• sgetspent_r(3) get shadow password file entry
• sgetspent(3) get shadow password file entry
• shm_open(3) create/open or unlink POSIX shared memory objects
• shm_unlink(3) create/open or unlink POSIX shared memory objects
• shmat(2) System V shared memory operations
• shmctl(2) System V shared memory control
• shmdt(2) System V shared memory operations
• shmget(2) allocates a System V shared memory segment
• shmop(2) System V shared memory operations
• shutdown(2) shut down part of a full-duplex connection
• sigabbrev_np(3) return string describing signal
• sigaction(2) examine and change a signal action
• sigaddset(3) POSIX
• sigaltstack(2) set and/or get signal stack context
• sigandset(3) POSIX
• sigblock(3) BSD signal API
• sigdelset(3) POSIX
• sigdescr_np(3) return string describing signal
• sigemptyset(3) POSIX
• sigfillset(3) POSIX
• siggetmask(3) BSD signal API
• sighold(3) System V signal API
• sigignore(3) System V signal API
• siginterrupt(3) allow signals to interrupt system calls
• sigisemptyset(3) POSIX
• sigismember(3) POSIX
• siglongjmp(3) performing a nonlocal goto
• sigmask(3) BSD signal API
• signal(2) ANSI C signal handling
• signalfd(2) create a file descriptor for accepting signals
• signalfd4(2) create a file descriptor for accepting signals
• signbit(3) test sign of a real floating-point number
• signgam(3) log gamma function
• significand(3) get mantissa of floating-point number
• significandf(3) get mantissa of floating-point number
• significandl(3) get mantissa of floating-point number
• sigorset(3) POSIX
• sigpause(3) atomically release blocked signals and wait for interrupt
• sigpending(2) examine pending signals
• sigprocmask(2) examine and change blocked signals
• sigqueue(3) queue a signal and data to a process
• sigrelse(3) System V signal API
• sigreturn(2) return from signal handler and cleanup stack frame
• sigset(3) System V signal API
• sigsetjmp(3) performing a nonlocal goto
• sigsetmask(3) BSD signal API
• sigsetops(3) POSIX
• sigstack(3) set and/or get signal stack context
• sigsuspend(2) wait for a signal
• sigtimedwait(2) synchronously wait
• sigvec(3) BSD signal API
• sigwait(3) wait for a signal
• sigwaitinfo(2) synchronously wait
• SIMPLEQ_EMPTY(3) implementation of a singly linked tail queue
• SIMPLEQ_ENTRY(3) implementation of a singly linked tail queue
• SIMPLEQ_FIRST(3) implementation of a singly linked tail queue
• SIMPLEQ_FOREACH(3) implementation of a singly linked tail queue
• SIMPLEQ_HEAD_INITIALIZER(3) implementation of a singly linked tail queue
• SIMPLEQ_HEAD(3) implementation of a singly linked tail queue
• SIMPLEQ_INIT(3) implementation of a singly linked tail queue
• SIMPLEQ_INSERT_AFTER(3) implementation of a singly linked tail queue
• SIMPLEQ_INSERT_HEAD(3) implementation of a singly linked tail queue
• SIMPLEQ_INSERT_TAIL(3) implementation of a singly linked tail queue
• SIMPLEQ_NEXT(3) implementation of a singly linked tail queue
• SIMPLEQ_REMOVE_HEAD(3) implementation of a singly linked tail queue
• SIMPLEQ_REMOVE(3) implementation of a singly linked tail queue
• simpleq(3) implementation of a singly linked tail queue
• sin(3) sine function
• sincos(3) calculate sin and cos simultaneously
• sincosf(3) calculate sin and cos simultaneously
• sincosl(3) calculate sin and cos simultaneously
• sinf(3) sine function
• sinh(3) hyperbolic sine function
• sinhf(3) hyperbolic sine function
• sinhl(3) hyperbolic sine function
• sinl(3) sine function
• sleep(3) sleep for a specified number of seconds
• SLIST_EMPTY(3) implementation of a singly linked list
• SLIST_ENTRY(3) implementation of a singly linked list
• SLIST_FIRST(3) implementation of a singly linked list
• SLIST_FOREACH(3) implementation of a singly linked list
• SLIST_HEAD_INITIALIZER(3) implementation of a singly linked list
• SLIST_HEAD(3) implementation of a singly linked list
• SLIST_INIT(3) implementation of a singly linked list
• SLIST_INSERT_AFTER(3) implementation of a singly linked list
• SLIST_INSERT_HEAD(3) implementation of a singly linked list
• SLIST_NEXT(3) implementation of a singly linked list
• SLIST_REMOVE_HEAD(3) implementation of a singly linked list
• SLIST_REMOVE(3) implementation of a singly linked list
• slist(3) implementation of a singly linked list
• snprintf(3) formatted output conversion
• sockatmark(3) determine whether socket is at out-of-band mark
• socket(2) create an endpoint for communication
• socketcall(2) socket system calls
• socketpair(2) create a pair of connected sockets
• splice(2) splice data to/from a pipe
• sprintf(3) formatted output conversion
• spu_create(2) create a new spu context
• spu_run(2) execute an SPU context
• sqrt(3) square root function
• sqrtf(3) square root function
• sqrtl(3) square root function
• srand(3) pseudo-random number generator
• srand48_r(3) generate uniformly distributed pseudo-random numbers reentrantly
• srand48(3) generate uniformly distributed pseudo-random numbers
• srandom_r(3) reentrant
• srandom(3) random number generator
• sscanf(3) input string format conversion
• ssetmask(2) manipulation of signal mask (obsolete)
• ssignal(3) software signal facility
• STAILQ_CONCAT(3) implementation of a singly linked tail queue
• STAILQ_EMPTY(3) implementation of a singly linked tail queue
• STAILQ_ENTRY(3) implementation of a singly linked tail queue
• STAILQ_FIRST(3) implementation of a singly linked tail queue
• STAILQ_FOREACH(3) implementation of a singly linked tail queue
• STAILQ_HEAD_INITIALIZER(3) implementation of a singly linked tail queue
• STAILQ_HEAD(3) implementation of a singly linked tail queue
• STAILQ_INIT(3) implementation of a singly linked tail queue
• STAILQ_INSERT_AFTER(3) implementation of a singly linked tail queue
• STAILQ_INSERT_HEAD(3) implementation of a singly linked tail queue
• STAILQ_INSERT_TAIL(3) implementation of a singly linked tail queue
• STAILQ_NEXT(3) implementation of a singly linked tail queue
• STAILQ_REMOVE_HEAD(3) implementation of a singly linked tail queue
• STAILQ_REMOVE(3) implementation of a singly linked tail queue
• stailq(3) implementation of a singly linked tail queue
• stat(2) get file status
• stat64(2) get file status
• statfs(2) get filesystem statistics
• statfs64(2) get filesystem statistics
• static_assert(3) fail compilation if assertion is false
• statvfs(3) get filesystem statistics
• statx(2) get file status (extended)
• stdarg(3) variable argument lists
• stderr(3) standard I/O streams
• stdin(3) standard I/O streams
• stdio_ext(3) interfaces to stdio FILE structure
• stdio(3) standard input/output library functions
• stdout(3) standard I/O streams
• stime(2) set time
• stpcpy(3) copy or catenate a string
• stpncpy(3) zero a fixed-width buffer and
• strcasecmp(3) compare two strings ignoring case
• strcasestr(3) locate a substring
• strcat(3) copy or catenate a string
• strchr(3) locate character in string
• strchrnul(3) locate character in string
• strcmp(3) compare two strings
• strcoll(3) compare two strings using the current locale
• strcpy(3) copy or catenate a string
• strcspn(3) get length of a prefix substring
• strdup(3) duplicate a string
• strdupa(3) duplicate a string
• strerror_l(3) return string describing error number
• strerror_r(3) return string describing error number
• strerror(3) return string describing error number
• strerrordesc_np(3) return string describing error number
• strerrorname_np(3) return string describing error number
• strfmon_l(3) convert monetary value to a string
• strfmon(3) convert monetary value to a string
• strfromd(3) convert a floating-point value into
• strfromf(3) convert a floating-point value into
• strfroml(3) convert a floating-point value into
• strfry(3) randomize a string
• strftime_l(3) format date and time
• strftime(3) format date and time
• string(3) string operations
• strlen(3) calculate the length of a string
• strncasecmp(3) compare two strings ignoring case
• strncat(3) concatenate a null-padded character sequence into a string
• strncmp(3) compare two strings
• strncpy(3) zero a fixed-width buffer and
• strndup(3) duplicate a string
• strndupa(3) duplicate a string
• strnlen(3) determine the length of a fixed-size string
• strpbrk(3) search a string for any of a set of bytes
• strptime(3) convert a string representation of time to a time tm structure
• strrchr(3) locate character in string
• strsep(3) extract token from string
• strsignal(3) return string describing signal
• strspn(3) get length of a prefix substring
• strstr(3) locate a substring
• strtod(3) convert ASCII string to floating-point number
• strtof(3) convert ASCII string to floating-point number
• strtoimax(3) convert string to integer
• strtok_r(3) extract tokens from strings
• strtok(3) extract tokens from strings
• strtol(3) convert a string to a long integer
• strtold(3) convert ASCII string to floating-point number
• strtoll(3) convert a string to a long integer
• strtoq(3) convert a string to a long integer
• strtoul(3) convert a string to an unsigned long integer
• strtoull(3) convert a string to an unsigned long integer
• strtoumax(3) convert string to integer
• strtouq(3) convert a string to an unsigned long integer
• strverscmp(3) compare two version strings
• strxfrm(3) string transformation
• stty(2) unimplemented system calls
• subpage_prot(2) define a subpage protection for an address range
• svc_destroy(3) library routines for remote procedure calls
• svc_freeargs(3) library routines for remote procedure calls
• svc_getargs(3) library routines for remote procedure calls
• svc_getcaller(3) library routines for remote procedure calls
• svc_getreq(3) library routines for remote procedure calls
• svc_getreqset(3) library routines for remote procedure calls
• svc_register(3) library routines for remote procedure calls
• svc_run(3) library routines for remote procedure calls
• svc_sendreply(3) library routines for remote procedure calls
• svc_unregister(3) library routines for remote procedure calls
• svcerr_auth(3) library routines for remote procedure calls
• svcerr_decode(3) library routines for remote procedure calls
• svcerr_noproc(3) library routines for remote procedure calls
• svcerr_noprog(3) library routines for remote procedure calls
• svcerr_progvers(3) library routines for remote procedure calls
• svcerr_systemerr(3) library routines for remote procedure calls
• svcerr_weakauth(3) library routines for remote procedure calls
• svcfd_create(3) library routines for remote procedure calls
• svcraw_create(3) library routines for remote procedure calls
• svctcp_create(3) library routines for remote procedure calls
• svcudp_bufcreate(3) library routines for remote procedure calls
• svcudp_create(3) library routines for remote procedure calls
• swab(3) swap adjacent bytes
• swapcontext(3) manipulate user context
• swapoff(2) start/stop swapping to file/device
• swapon(2) start/stop swapping to file/device
• swprintf(3) formatted
• symlink(2) make a new name for a file
• symlinkat(2) make a new name for a file
• sync_file_range(2) sync a file segment with disk
• sync_file_range2(2) sync a file segment with disk
• sync(2) commit filesystem caches to disk
• syncfs(2) commit filesystem caches to disk
• sys_errlist(3) print a system error message
• sys_nerr(3) print a system error message
• sys_siglist(3) return string describing signal
• syscall(2) indirect system call
• syscalls(2) Linux system calls
• sysconf(3) get configuration information at run time
• sysctl(2) read/write system parameters
• sysfs(2) get filesystem type information
• sysinfo(2) return system information
• syslog(2) read and/or clear kernel message ring buffer;
• syslog(3) send messages to the system logger
• system(3) execute a shell command
• sysv_signal(3) signal handling with System V semantics
• TAILQ_CONCAT(3) implementation of a doubly linked tail queue
• TAILQ_EMPTY(3) implementation of a doubly linked tail queue
• TAILQ_ENTRY(3) implementation of a doubly linked tail queue
• TAILQ_FIRST(3) implementation of a doubly linked tail queue
• TAILQ_FOREACH_REVERSE(3) implementation of a doubly linked tail queue
• TAILQ_FOREACH(3) implementation of a doubly linked tail queue
• TAILQ_HEAD_INITIALIZER(3) implementation of a doubly linked tail queue
• TAILQ_HEAD(3) implementation of a doubly linked tail queue
• TAILQ_INIT(3) implementation of a doubly linked tail queue
• TAILQ_INSERT_AFTER(3) implementation of a doubly linked tail queue
• TAILQ_INSERT_BEFORE(3) implementation of a doubly linked tail queue
• TAILQ_INSERT_HEAD(3) implementation of a doubly linked tail queue
• TAILQ_INSERT_TAIL(3) implementation of a doubly linked tail queue
• TAILQ_LAST(3) implementation of a doubly linked tail queue
• TAILQ_NEXT(3) implementation of a doubly linked tail queue
• TAILQ_PREV(3) implementation of a doubly linked tail queue
• TAILQ_REMOVE(3) implementation of a doubly linked tail queue
• TAILQ_SWAP(3) implementation of a doubly linked tail queue
• tailq(3) implementation of a doubly linked tail queue
• tan(3) tangent function
• tanf(3) tangent function
• tanh(3) hyperbolic tangent function
• tanhf(3) hyperbolic tangent function
• tanhl(3) hyperbolic tangent function
• tanl(3) tangent function
• tcdrain(3) get and set terminal attributes, line control, get and set baud rate
• tcflow(3) get and set terminal attributes, line control, get and set baud rate
• tcflush(3) get and set terminal attributes, line control, get and set baud rate
• tcgetattr(3) get and set terminal attributes, line control, get and set baud rate
• tcgetpgrp(3) get and set terminal foreground process group
• tcgetsid(3) get session ID
• tcsendbreak(3) get and set terminal attributes, line control, get and set baud rate
• tcsetattr(3) get and set terminal attributes, line control, get and set baud rate
• tcsetpgrp(3) get and set terminal foreground process group
• tdelete(3) manage a binary search tree
• tdestroy(3) manage a binary search tree
• tee(2) duplicating pipe content
• telldir(3) return current location in directory stream
• tempnam(3) create a name for a temporary file
• termios(3) get and set terminal attributes, line control, get and set baud rate
• tfind(3) manage a binary search tree
• tgamma(3) true gamma function
• tgammaf(3) true gamma function
• tgammal(3) true gamma function
• tgkill(2) send a signal to a thread
• time(2) get time in seconds
• timegm(3) inverses of gmtime and localtime
• timelocal(3) inverses of gmtime and localtime
• timer_create(2) create a POSIX per-process timer
• timer_delete(2) delete a POSIX per-process timer
• timer_getoverrun(2) get overrun count for a POSIX per-process timer
• timer_gettime(2) arm/disarm and fetch
• timer_settime(2) arm/disarm and fetch
• timeradd(3) timeval operations
• timerclear(3) timeval operations
• timercmp(3) timeval operations
• timerfd_create(2) timers that notify via file descriptors
• timerfd_gettime(2) timers that notify via file descriptors
• timerfd_settime(2) timers that notify via file descriptors
• timerisset(3) timeval operations
• timersub(3) timeval operations
• times(2) get process times
• timezone(3) initialize time conversion information
• tkill(2) send a signal to a thread
• tmpfile(3) create a temporary file
• tmpnam_r(3) create a name for a temporary file
• tmpnam(3) create a name for a temporary file
• toascii(3) convert character to ASCII
• tolower_l(3) convert uppercase or lowercase
• tolower(3) convert uppercase or lowercase
• toupper_l(3) convert uppercase or lowercase
• toupper(3) convert uppercase or lowercase
• towctrans(3) wide-character transliteration
• towlower_l(3) convert a wide character to lowercase
• towlower(3) convert a wide character to lowercase
• towupper_l(3) convert a wide character to uppercase
• towupper(3) convert a wide character to uppercase
• trunc(3) round to integer, toward zero
• truncate(2) truncate a file to a specified length
• truncate64(2) truncate a file to a specified length
• truncf(3) round to integer, toward zero
• truncl(3) round to integer, toward zero
• tsearch(3) manage a binary search tree
• tty_ioctl(4)
• ttyname_r(3) return name of a terminal
• ttyname(3) return name of a terminal
• ttyslot(3) find the slot of the current user's terminal in some file
• tuxcall(2) unimplemented system calls
• twalk_r(3) manage a binary search tree
• twalk(3) manage a binary search tree
• tzname(3) initialize time conversion information
• tzset(3) initialize time conversion information
• ualarm(3) schedule signal after given number of microseconds
• ugetrlimit(2) get/set resource limits
• ulckpwdf(3) get shadow password file entry
• ulimit(3) get and set user limits
• umask(2) set file mode creation mask
• umount(2) unmount filesystem
• umount2(2) unmount filesystem
• uname(2) get name and information about current kernel
• undocumented(3) undocumented library functions
• ungetc(3) input of characters and strings
• ungetwc(3) push back a wide character onto a FILE stream
• unimplemented(2) unimplemented system calls
• unlink(2) delete a name and possibly the file it refers to
• unlinkat(2) delete a name and possibly the file it refers to
• unlocked_stdio(3) nonlocking stdio functions
• unlockpt(3) unlock a pseudoterminal master/slave pair
• unsetenv(3) change or add an environment variable
• unshare(2) disassociate parts of the process execution context
• updwtmp(3) append an entry to the wtmp file
• updwtmpx(3) append an entry to the wtmp file
• uselib(2) load shared library
• uselocale(3) set/get the locale for the calling thread
• userfaultfd(2) create a file descriptor for handling page faults in user space
• usleep(3) suspend execution for microsecond intervals
• ustat(2) get filesystem statistics
• utime(2) change file last access and modification times
• utimensat(2) change file timestamps with nanosecond precision
• utimes(2) change file last access and modification times
• utmpname(3) access utmp file entries
• utmpxname(3) access utmp file entries
• va_arg(3) variable argument lists
• va_copy(3) variable argument lists
• va_end(3) variable argument lists
• va_start(3) variable argument lists
• valloc(3) allocate aligned memory
• vasprintf(3) print to allocated string
• vdprintf(3) formatted output conversion
• verr(3) formatted error messages
• verrx(3) formatted error messages
• versionsort(3) scan
• vfork(2) create a child process and block parent
• vfprintf(3) formatted output conversion
• vfscanf(3) input FILE format conversion
• vfwprintf(3) formatted
• vhangup(2) virtually hangup the current terminal
• vlimit(3) get/set resource limits
• vm86(2) enter virtual 8086 mode
• vm86old(2) enter virtual 8086 mode
• vmsplice(2) splice user pages to/from a pipe
• vprintf(3) formatted output conversion
• vscanf(3) input FILE format conversion
• vserver(2) unimplemented system calls
• vsnprintf(3) formatted output conversion
• vsprintf(3) formatted output conversion
• vsscanf(3) input string format conversion
• vswprintf(3) formatted
• vsyslog(3) send messages to the system logger
• vtimes(3) get resource usage
• vwarn(3) formatted error messages
• vwarnx(3) formatted error messages
• vwprintf(3) formatted
• wait(2) wait for process to change state
• wait3(2) wait for process to change state, BSD style
• wait4(2) wait for process to change state, BSD style
• waitid(2) wait for process to change state
• waitpid(2) wait for process to change state
• warn(3) formatted error messages
• warnx(3) formatted error messages
• wcpcpy(3) copy a wide-character string, returning a pointer to its end
• wcpncpy(3) copy a fixed-size string of wide characters,
• wcrtomb(3) convert a wide character to a multibyte sequence
• wcscasecmp(3) compare two wide-character strings, ignoring case
• wcscat(3) concatenate two wide-character strings
• wcschr(3) search a wide character in a wide-character string
• wcscmp(3) compare two wide-character strings
• wcscpy(3) copy a wide-character string
• wcscspn(3) search a wide-character string for any of a set of wide characters
• wcsdup(3) duplicate a wide-character string
• wcslen(3) determine the length of a wide-character string
• wcsncasecmp(3) compare two fixed-size wide-character strings, ignoring case
• wcsncat(3) concatenate two wide-character strings
• wcsncmp(3) compare two fixed-size wide-character strings
• wcsncpy(3) copy a fixed-size string of wide characters
• wcsnlen(3) determine the length of a fixed-size wide-character string
• wcsnrtombs(3) convert a wide-character string to a multibyte string
• wcspbrk(3) search a wide-character string for any of a set of wide characters
• wcsrchr(3) search a wide character in a wide-character string
• wcsrtombs(3) convert a wide-character string to a multibyte string
• wcsspn(3) get length of a prefix wide-character substring
• wcsstr(3) locate a substring in a wide-character string
• wcstoimax(3) convert wide-character string to integer
• wcstok(3) split wide-character string into tokens
• wcstombs(3) convert a wide-character string to a multibyte string
• wcstoumax(3) convert wide-character string to integer
• wcswidth(3) determine columns needed for a fixed-size wide-character string
• wctob(3) try to represent a wide character as a single byte
• wctomb(3) convert a wide character to a multibyte sequence
• wctrans(3) wide-character translation mapping
• wctype(3) wide-character classification
• wcwidth(3) determine columns needed for a wide character
• wmemchr(3) search a wide character in a wide-character array
• wmemcmp(3) compare two arrays of wide-characters
• wmemcpy(3) copy an array of wide-characters
• wmemmove(3) copy an array of wide-characters
• wmempcpy(3) copy memory area
• wmemset(3) fill an array of wide-characters with a constant wide character
• wordexp(3) perform word expansion like a posix-shell
• wordfree(3) perform word expansion like a posix-shell
• wprintf(3) formatted
• write(2) write to a file descriptor
• writev(2) read or write data into multiple buffers
• xcrypt(3) RFS password encryption
• xdecrypt(3) RFS password encryption
• xdr_accepted_reply(3) library routines for remote procedure calls
• xdr_array(3) library routines for external data representation
• xdr_authunix_parms(3) library routines for remote procedure calls
• xdr_bool(3) library routines for external data representation
• xdr_bytes(3) library routines for external data representation
• xdr_callhdr(3) library routines for remote procedure calls
• xdr_callmsg(3) library routines for remote procedure calls
• xdr_char(3) library routines for external data representation
• xdr_destroy(3) library routines for external data representation
• xdr_double(3) library routines for external data representation
• xdr_enum(3) library routines for external data representation
• xdr_float(3) library routines for external data representation
• xdr_free(3) library routines for external data representation
• xdr_getpos(3) library routines for external data representation
• xdr_inline(3) library routines for external data representation
• xdr_int(3) library routines for external data representation
• xdr_long(3) library routines for external data representation
• xdr_opaque_auth(3) library routines for remote procedure calls
• xdr_opaque(3) library routines for external data representation
• xdr_pmap(3) library routines for remote procedure calls
• xdr_pmaplist(3) library routines for remote procedure calls
• xdr_pointer(3) library routines for external data representation
• xdr_reference(3) library routines for external data representation
• xdr_rejected_reply(3) library routines for remote procedure calls
• xdr_replymsg(3) library routines for remote procedure calls
• xdr_setpos(3) library routines for external data representation
• xdr_short(3) library routines for external data representation
• xdr_string(3) library routines for external data representation
• xdr_u_char(3) library routines for external data representation
• xdr_u_int(3) library routines for external data representation
• xdr_u_long(3) library routines for external data representation
• xdr_u_short(3) library routines for external data representation
• xdr_union(3) library routines for external data representation
• xdr_vector(3) library routines for external data representation
• xdr_void(3) library routines for external data representation
• xdr_wrapstring(3) library routines for external data representation
• xdr(3) library routines for external data representation
• xdrmem_create(3) library routines for external data representation
• xdrrec_create(3) library routines for external data representation
• xdrrec_endofrecord(3) library routines for external data representation
• xdrrec_eof(3) library routines for external data representation
• xdrrec_skiprecord(3) library routines for external data representation
• xdrstdio_create(3) library routines for external data representation
• xencrypt(3) RFS password encryption
• xprt_register(3) library routines for remote procedure calls
• xprt_unregister(3) library routines for remote procedure calls
• y0(3) Bessel functions of the second kind
• y0f(3) Bessel functions of the second kind
• y0l(3) Bessel functions of the second kind
• y1(3) Bessel functions of the second kind
• y1f(3) Bessel functions of the second kind
• y1l(3) Bessel functions of the second kind
• yn(3) Bessel functions of the second kind
• ynf(3) Bessel functions of the second kind
• ynl(3) Bessel functions of the second kind