Opa-Fastfabric

• opa2rm(8) opa2rm Permits the generation of configuration files for FastFabric or resource managers from a topology xml file.
• opaallanalysis(8) opaallanalysis (All) opaallanalysis command performs the set of analysis specified in FF\(ulALL\(ulANALYSIS and can be specified for fabric,
• opacabletest(8) opacabletest (Switch) Initiates or stops Cable Bit Error Rate stress tests for Intel(R) Omni-Path Host Fabric Interface (HFI)-to-switch links and/or
• opacaptureall(8) opacaptureall (Chassis and Host) Captures supporting information for a problem report from all hosts or Intel(R) Omni-Path Chassis and uploads to
• opachassisadmin(8) opachassisadmin (Switch) Performs a number of multi-step chassis initialization and verification operations, including initial chassis setup,
• opachassisanalysis(8) opachassisanalysis (Switch) Performs analysis of the chassis.
• opacheckload(8) opacheckload Returns load information on hosts in the fabric.
• opacmdall(8) opacmdall (Linux and Switch) Executes a command on all hosts or Intel(R) Omni-Path Chassis.
• opadisablehosts(8) opadisablehosts (Linux) Searches for a set of hosts in the fabric and disables their corresponding switch port.
• opadisableports(8) opadisableports (Linux) Accepts a CSV file listing links to disable.
• opadownloadall(8) opadownloadall (Linux) Copies one or more files to a group of hosts from a system.
• opaenableports(8) opaenableports (Linux) Accepts a disabled ports input file and re-enables the specified ports.
• opaesmanalysis(8) opaesmanalysis (Switch) Performs analysis of the embedded Subnet Manager (SM) for configuration and health.
• opaexpandfile(8) opaexpandfile (Linux) Expands a Intel(R) Omni-Path Fabric Suite FastFabric hosts, chassis, or switches file.
• opaextractbadlinks(8) opaextractbadlinks Produces a CSV file listing all or some of the links that exceed opareport -o error thresholds.
• opaextracterror(8) opaextracterror Produces a CSV file listing all or some of the errors in the current fabric.
• opaextractlids(8) opaextractlids Produces a CSV file listing all or some of the LIDs in the fabric.
• opaextractlink(8) opaextractlink Produces a CSV file listing all or some of the links in the fabric.
• opaextractmissinglinks(8) opaextractmissinglinks Produces a CSV file listing all or some of the links in the fabric.
• opaextractperf(8) opaextractperf Provides a report of all performance counters in a CVS format suitable for importing into a spreadsheet or parsed by other scripts for
• opaextractperf2(8) opaextractperf2 Provides a report of all performance counters in a CSV format suitable for importing into a spreadsheet or parsed by other scripts
• opaextractsellinks(8) opaextractsellinks Produces a CSV file listing all or some of the links in the fabric.
• opaextractstat(8) opaextractstat Performs an error analysis of a fabric and provides augmented information from a topology\(ulfile.
• opaextractstat2(8) opaextractstat2 Performs an error analysis of a fabric and provides augmented information from a topology\(ulfile including all error counters.
• opafabricanalysis(8) opafabricanalysis (All) Performs analysis of the fabric.
• opafastfabric(8) opafastfabric (Switch and Host) Starts the top-level Intel(R) Omni-Path Fabric Suite FastFabric Text-based User Interface (TUI) menu to enable setup
• opafindgood(8) opafindgood Checks for hosts that are able to be pinged, accessed via SSH, and active on the Intel(R) Omni-Path Fabric.
• opafirmware(8) opafirmware Returns firmware information.
• opafmconfigcheck(8) opafmconfigcheck Parses and verifies the configuration file of a Fabric Manager (FM).
• opafmconfigdiff(8) opafmconfigdiff Performs a file difference between two configuration files corresponding to two FM instances described by file1 and
• opagenchassis(8) opagenchassis Generates a list of IPv4, IPv6, and/or TCP names in a format acceptable for inclusion in the /etc/opa/chassis
• opagenesmchassis(8) opagenesmchassis Generates a list of chassis IPv4 and IPv6 addresses and/or TCP names where the Embedded Subnet Manager (ESM) is running, in a format
• opagenswitches(8) opagenswitches Analyzes the present fabric and produces a list of Externally Managed switches in the required format for the /etc/opa/switches
• opagentopology(8) opagentopology Provides a simple sample of how to generate the topology XML file used for topology verification.
• opahostadmin(8) opahostadmin (Host) Performs a number of multi-step host initialization and verification operations, including upgrading software or firmware,
• opahostsmanalysis(8) opahostsmanalysis (All) Performs analysis against the local server only.
• opaledports(8) opaledports Toggles the beaconing LED state of HFIs, switches, and switch ports.
• opalinkanalysis(8) opalinkanalysis (Switch) Encapsulates the capabilities for link analysis.
• opamergeperf2(8) opamergeperf2 Merges the output from two opaextactperf2 runs from the same fabric.
• opapaquery(8) opapaquery (All) Performs various queries of the performance management (PM)/performance administration (PA) agent and provides details about fabric
• opapingall(8) opapingall (All) Pings a group of hosts or chassis to verify that they are powered on and accessible through TCP/IP
• opareport(8) opareport (All) Provides powerful fabric analysis and reporting capabilities.
• opareports(8) opareports (All) opareports is a front end to opareport that provides many of the same options and capabilities.
• opascpall(8) opascpall (Linux) Copies files or directories from the current system to multiple hosts in the fabric.
• opasetupssh(8) opasetupssh (Linux or Switch) Creates SSH keys and configures them on all hosts or chassis so the system can use SSH and SCP into all other hosts or
• opashowallports(8) opashowallports (Switch and Host) Displays basic port state and statistics for all host nodes, chassis, or externally-managed switches.
• opashowmc(8) opashowmc (Linux) Displays the Intel(R) Omni-Path Multicast groups created for the fabric along with the Intel(R) Omni-Path Host Fabric Interface
• opasorthosts(8) opasorthosts Sorts its standard input in a typical host name order and sorts to standard output.
• opaswdisableall(8) opaswdisableall (Linux) Disables all unused switch ports.
• opaswenableall(8) opaswenableall (Linux) Re-enables all unused (or disabled) switch ports.
• opaswitchadmin(8) opaswitchadmin (Switch) Performs a number of multi-step initialization and verification operations against one or more externally managed Intel(R)
• opatop(8) opatop Starts the Fabric Performance Monitor (opatop) Text-based User Interface (TUI) menu to display performance, congestion, and error information
• opauploadall(8) opauploadall (Linux) Copies one or more files from a group of hosts to this system.
• opaverifyhosts(8) opaverifyhosts Verifies basic node configuration and performance by running FF\(ulHOSTVERIFY\(ulDIR/hostverifyon all specified hosts.
• opaxlattopology(8) opaxlattopology Generates a topology XML file of a cluster using your customized <topologyfile>, linksum\(ulswd06, and linksum\(ulswd24as input.
• opaxmlextract(8) opaxmlextract (Linux) Extracts element values from XML input and outputs the data in CSV format.
• opaxmlfilter(8) opaxmlfilter Processes an XML file and removes all specified XML tags.
• opaxmlgenerate(8) opaxmlgenerate (Linux) Takes comma-separated-values (CSV) data as input and generates sequences of XML containing user-specified element names and
• opaxmlindent(8) opaxmlindent (Linux) Takes well-formed XML as input, filters out comments, and generates a uniformly-indented equivalent XML file.