Archives

• __pmServerNotifyServiceManagerReady(3) notify service start and stop
• __pmServerNotifyServiceManagerStopping(3) notify service start and stop
• 7z(1) A file archiver with high compression ratio format
• aa(1) calculate planet and star positions
• abuild(1) build coreboot images for all available targets
• afsd(8) Initializes the Cache Manager and starts related daemons
• alr-edit(1) Start GNATstudio with Alire build environment setup
• amanda-rest-server(8) Start or stop the Amanda Rest Server
• ambsdtar(8) Amanda Application to interface with BSD Tar
• amgtar(8) Amanda Application to interface with GNU Tar
• amstar(8) Amanda Application to interface with star
• amsuntar(8) Amanda Application to interface with native tar utility available on solaris platforms
• ansible-playbook(1) Runs Ansible playbooks, executing the defined tasks on the targeted hosts.
• applydeltarpm(8) reconstruct an rpm from a deltarpm
• ar(1) create, modify, and extract from archives
• aranym-jit(1) Atari Running on Any Machine - JIT enabled
• aranym-mmu(1) Atari Running on Any Machine with 68040 MMU enabled
• aranym(1) Atari Running on Any Machine
• aratapif(1) Atari Running on Any Machine - aratapif
• arp-scan(1) Send ARP requests to target hosts and display responses
• array-info(1) check the status of a HP (Compaq) SmartArray controller
• art_profiler_454(1) create an illumina read quality profile from multiple fastq or gzipped fastq files
• astribank_is_starting(8) Mark / check is a Xorcom Astribank (xpp) is starting
• astrometry-engine(1) Identify where a list of stars is on the sky
• astscript-psf-scale-factor(1) Find factor to scale PSF to a given star in an image
• astscript-psf-select-stars(1) Select good stars for constructing the PSF
• astscript-psf-stamp(1) Make normalized stamp of star with background objects masked
• astscript-psf-subtract(1) Subtract a given PSF model from the image of star
• atari-convert-dir(1) convert-dir - helper for creating Atari compatible disk images
• atari-hd-image(1) hd-image - tool for creating a harddisk image for use with Hatari
• atari800(1) emulator of Atari 8-bit computers and the 5200 console
• backup-driver(1) entry point for cron or inittab to start backups
• bam2starch(1) manual page for bam2starch 2.4.41+dfsg
• bastet(6) Tetris(r) clone with "bastard" block-choosing AI
• bcron-start(8) Start the bcron scheduling system
• bdflush(2) start, flush, or tune buffer-dirty-flush daemon
• bedops-starch(1) manual page for bedops-starch 2.4.41+dfsg
• bf_tar(1) shell script to write a tar file of a bogofilter directory to stdout
• bin2rec(1) bin2rec - converts biosignal data produced with rec2bin, into a gdf file.
• blaeu-reach(1) blaeu-reach : (test reachability of the target, like ping)
• bni2tga(1) convert a Battle.net icon file to a Targa file
• bnibuild(1) build a Battle.net icon file from a directory of Targa icon files
• bniextract(1) extract a directory of Targa icon files from a Battle.net icon file
• borg-export-tar(1) Export archive contents as a tarball
• borg-import-tar(1) Create a backup archive from a tarball
• borg-serve(1) Start in server mode. This command is usually not used manually.
• borg2-export-tar(1) Export archive contents as a tarball
• borg2-import-tar(1) Create a backup archive from a tarball
• borg2-serve(1) Start in server mode. This command is usually not used manually.
• bos_create(8) Defines a new process in the BosConfig file and starts it
• bos_getrestart(8) Displays the automatic restart times for server processes
• bos_restart(8) Restarts a server process
• bos_setrestart(8) Sets when the BOS Server restarts processes
• bos_start(8) Starts a process after setting its status flag
• bos_startup(8) Starts a process without changing its status flag
• browserslist(1) The config to share target browsers and Node.js versions
• buildah-from(1) buildah-from - Creates a new working container, either from scratch or using a specified image as a starting point.
• bup-web(1) bup-web - Start web server to browse bup repositiory
• byobu-disable(1) wrapper script for enabling/disabling automatic startup of byobu after login into text console
• byobu-enable(1) wrapper script for enabling/disabling automatic startup of byobu after login into text console
• bzip2(1) a block-sorting file compressor, v1.0.8
• caddy-run(8) caddy-run - Starts the Caddy process and blocks indefinitely
• caddy-start(8) caddy-start - Starts the Caddy process in the background and then returns
• caddy-stop(8) caddy-stop - Gracefully stops a started Caddy process
• caja-actions-run(1) actions-run - execute an action on the specified target
• cargo-package(1) package - Assemble the local package into a distributable tarball
• catalog_server(1) catalog_server - start a catalog server
• cciss_vol_status(8) show status of logical drives attached to HP Smartarray controllers
• cdist-type__firewalld_start(7) type__firewalld_start - start and enable firewalld
• cdist-type__install_umount(7) type__install_umount - umount target directory
• cdist-type__pf_apply_anchor(7) type__pf_apply_anchor - Apply a pf(4) anchor on $__target_host
• cdist-type__pf_ruleset(7) type__pf_ruleset - Copy a pf(4) ruleset to $__target_host
• cdist-type__process(7) type__process - Start or stop process
• cdist-type__start_on_boot(7) type__start_on_boot - Manage stuff to be started at boot
• cdloop(1) Restart a CD when it ceases playing
• ceph-run(8) restart daemon on core dump
• cerfcx(3) underflow-compensated complementary error function
• charactermanaj(1) program to edit character avatars
• chartread(1) Read Target Test Chart.
• checkrestart(8) check which processes need to be restarted after an upgrade
• cherryd3(1) Starts the CherryPy HTTP server as a daemon
• cif_adjust_journal_name_volume(1) parse a CIF file, update the journal name and journal volume based on heuristics and output the updated file to STDOUT.
• cif_split_primitive(1) split CIF files into separate files with one data_ section each.
• cinnamon-launcher(1) Start or restart a cinnamon session
• cinnamon-session(1) Start the GNOME desktop environment
• claws-mail-libravatar(7) mail-libravatar - show profile images from a libravatar server
• cmake-properties(7) only logical name for the target as used by CMake.
• cnvkit-antitarget(1) Derive off-target ("antitarget") bins from target regions.
• cnvkit-breaks(1) List the targeted genes in which a copy number breakpoint occurs.
• cnvkit-fix(1) Combine target and antitarget coverages and correct for biases.
• cnvkit-genemetrics(1) Identify targeted genes with copy number gain or loss.
• cnvkit-reference2targets(1) Extract target and antitarget BED files from a CNVkit reference file.
• cnvkit-target(1) Transform bait intervals into targets more suitable for CNVkit.
• combine_lang_model(1) generate starter traineddata
• combinedeltarpm(8) combine multiple deltarpms to a single one
• comedi_command(3) start streaming input/output
• comprez(1) safely (un)tar and (de)feather files and directories
• container-auto(1) Start/stop all container automatically at boot/shutdown
• container-get-curl(1) Download a Debian based container by downloading a tarball over the network
• container-rebuild(1) Restart a container
• container-restart(1) Restart a container
• container-start(1) Start a container
• cow-shell(1) shell - Start a copy-on-write session and invoke a shell.
• cserver(8) To start the Chinese server.
• cst_end(7) cWnn Startup and Termination
• ct_run(1) Program used for starting Common Test from the
• cupsdisable(8) stop/start printers and classes
• cupsenable(8) stop/start printers and classes
• curl_easy_init(3) curl_easy_init - Start a libcurl easy session
• CURLINFO_PRETRANSFER_TIME_T(3) get the time until the file transfer start
• CURLINFO_PRETRANSFER_TIME(3) get the time until the file transfer start
• CURLOPT_CONNECT_ONLY(3) stop when connected to target server
• CURLOPT_COOKIESESSION(3) start a new cookie session
• CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS(3) head start for IPv6 for happy eyeballs
• CURLOPT_REQUEST_TARGET(3) alternative target for this request
• CURLOPT_RESOLVER_START_DATA(3) pointer passed to the resolver start callback
• CURLOPT_RESOLVER_START_FUNCTION(3) callback called before a new name resolve is started
• CURLOPT_SSL_FALSESTART(3) TLS false start
• cuum(1) To start the front-end processor.
• datalad-export-archive(1) export the content of a dataset as a TAR/ZIP archive.
• dbus-launch(1) Utility to start a message bus from a shell script
• dbus-run-session(1) start a process as a new D-Bus session
• DDNet-Server(6) Starts the DDNet server.
• DDNet(6) Starts the DDNet client.
• debian-edu-restart-services(8) restart the services that are running on this server.
• default.pa(5) PulseAudio Sound Server Startup Script
• dh_dist_zilla_origtar(1) debhelper add-on to generate an upstream tar ball
• dh_systemd_start(1) start/stop/restart systemd unit files
• dhcpstarv(1) DHCP starvation attack.
• dlt-logstorage-ctrl(1) \f[B]dlt-logstorage-ctrl\f[R] - Trigger DLT Daemon to start/stop using an offline logstorage device
• dlv-dap(1) dlv-dap - Starts a headless TCP server communicating via Debug Adaptor Protocol (DAP).
• dnf-needs-restarting(8) DNF needs_restarting Plugin
• docker-container-export(1) docker-container-export - Export a container's filesystem as a tar archive
• docker-container-restart(1) docker-container-restart - Restart one or more containers
• docker-container-start(1) docker-container-start - Start one or more stopped containers
• docker-context-export(1) docker-context-export - Export a context to a tar or kubeconfig file
• docker-context-import(1) docker-context-import - Import a context from a tar or zip file
• docker-export(1)
• docker-image-import(1) docker-image-import - Import the contents from a tarball to create a filesystem image
• docker-image-load(1) docker-image-load - Load an image from a tar archive or STDIN
• docker-image-save(1) docker-image-save - Save one or more images to a tar archive (streamed to STDOUT by default)
• docker-image-tag(1) docker-image-tag - Create a tag TARGET_IMAGE that refers to SOURCE_IMAGE
• docker-import(1)
• docker-load(1)
• docker-restart(1)
• docker-save(1)
• docker-start(1)
• docker-tag(1)
• dpt-missing-pristine-tar(1) missing-pristine-tar -- fix missing pristine-tar information
• dqcache-start(8) start - wrapper for dqcache daemon
• dracut-pre-udev.service(8) runs the dracut hooks before udevd is started
• drbd-8.3(8) The start and stop script for DRBD
• drbd-8.4(8) The start and stop script for DRBD
• drbd-9.0(8) The start and stop script for DRBD
• drbd-services@.target(7) System target unit to group services depending on a specific DRBD resource
• drbd(8) The start and stop script for DRBD
• drbd@.target(7) System target unit indicating a configured (optionally: promotable) DRBD resource
• drmaa_session(3) Start/finish Grid Engine DRMAA session
• drone(1) Starts server component of Ostinato.
• drpmsync(8) sync a file tree with deltarpms
• DS1963L(3) 256 byte Monetary iButton
• DS1963S(3) 256 byte Monetary iButton with SHA-1
• dtemacs(1) contact Emacs with gnuclient, starting Emacs if no answer.
• dune-build(1) dune\N'45'build \N'45' Build the given targets, or all installable targets if none are given\N'46'
• dune-external-lib-deps(1) dune\N'45'external\N'45'lib\N'45'deps \N'45' Print out external libraries needed to build the given targets\N'46'
• dune-ocaml-merlin(1) dune\N'45'ocaml\N'45'merlin \N'45' Start a merlin configuration server
• dx(1) start the Data Explorer visualization system. Optionally
• egd_start(3) start and stop buffered acquisition
• egd_stop(3) start and stop buffered acquisition
• encfssh(1) mount encrypted virtual filesystem and start shell
• erfc(3) complementary error function
• erfcf(3) complementary error function
• erfcl(3) complementary error function
• erfcx(3) underflow-compensated complementary error function
• eric7_tray(1) Traystarter for eric7
• erl_call(1) Call/start a distributed Erlang node.
• Esys_HashSequenceStart(3) The ESAPI function for the TPM2_HashSequenceStart command.
• Esys_HMAC_Start(3) The ESAPI function for the TPM2_HMAC_Start command.
• Esys_PolicyRestart(3) The ESAPI function for the TPM2_PolicyRestart command.
• Esys_StartAuthSession(3) The ESAPI function for the TPM2_StartAuthSession command.
• Esys_Startup(3) The ESAPI function for the TPM2_Startup command.
• eTktab(1) Tk based ascii guitar tab editor
• explain_getgroups_or_die(3) get supplementary group IDs and report errors
• explain_setgroups_or_die(3) set supplementary group IDs and report errors
• fail2ban-server(1) start the server
• fastaq-sequence_trim(1) Trim exact matches to a given string off the start of every sequence
• fastaq-trim_ends(1) Trim fixed number of bases of start and/or end of every sequence
• fastaq-trim_Ns_at_end(1) Trims all Ns at the start/end of all sequences
• fbautostart(1) Autostart all XDG applications
• fbb(8) Script to start the fbb daemon
• fbguard(8) start and restart firebid server
• FcCharSetFirstPage(3) Start enumerating charset contents
• fcgistarter(8) Start a FastCGI program
• fever-run(1) fever-run - start FEVER service
• ffmpegfs(1) mounts and transcodes a multitude of formats to one of the target formats on the fly.
• firemon(1) Monitoring program for processes started in a Firejail sandbox.
• footclient(1) footclient - start new terminals in a foot server
• frogatto(6) 2D platformer game starring a quixotic frog
• ftar(8) extract tar files using classes
• galera_new_cluster(1) starting a new Galera cluster
• garb-systemd(8) systemd start helper for arbitrator daemon
• gbp-export-orig(1) Export upstream tarballs from a Git repository
• gbp-pristine-tar(1) Manage pristine-tar commits in a git repository
• gd_alias_target(3) gd_alias_target — determine the target of an alias defined in a Dirfile database
• gd_alter_frameoffset(3) gd_alter_frameoffset \(em modify the starting frame of fields in a Dirfile
• gd_bof(3) gd_bof \(em find the start of data in a Dirfile field
• gd_bof64(3) gd_bof64 \(em find the start of data in a Dirfile field, with largefile support
• gd_frameoffset(3) gd_frameoffset \(em report the starting frame of fields in a Dirfile
• gdmflexiserver(1) start a GDM session using the GDM flexible server
• gem2tgz(1) converts Rubygems' .gem file into tarballs
• genisoimagerc(5) startup configuration file for genisoimage
• gensio_acc_disable(3) Stop/free a gensio accepter that is started up
• gensio_acc_free(3) Stop/free a gensio accepter that is started up
• gensio_acc_shutdown_s(3) Stop/free a gensio accepter that is started up
• gensio_acc_shutdown(3) Stop/free a gensio accepter that is started up
• gensio_acc_startup(3) Start a gensio accepter
• gensio_open_nochild_s(3) Start a connecting gensio
• gensio_open_nochild(3) Start a connecting gensio
• gensio_open_s(3) Start a connecting gensio
• gensio_open(3) Start a connecting gensio
• getgroups(2) get/set list of supplementary group IDs
• getgroups32(2) get/set list of supplementary group IDs
• gfarmbb(1) start and stop Gfarm/BB (Gfarm for node-local burst buffer)
• gff2starch(1) manual page for gff2starch 2.4.41+dfsg
• gh_xen_decrypt(1) Tool for decrypting Guitar Hero xen files
• gistandard(7) Process a spectro-photometric standard star observation and compute the instrument response curve.
• git-deborig(1) deborig - try to produce Debian orig.tar using git-archive(1)
• git-secret-add(1) secret-add - starts to track added files.
• globus_ftp_client_restart_extended_block_t(3) Extended block mode restart marker.
• globus_ftp_client_restart_marker_copy(3) Restart Markers
• globus_ftp_client_restart_marker_destroy(3) Restart Markers
• globus_ftp_client_restart_marker_from_string(3) Restart Markers
• globus_ftp_client_restart_marker_get_total(3) Restart Markers
• globus_ftp_client_restart_marker_init(3) Restart Markers
• globus_ftp_client_restart_marker_insert_range(3) Restart Markers
• globus_ftp_client_restart_marker_plugin_begin_cb_t(3) Restart Marker Plugin
• globus_ftp_client_restart_marker_plugin_complete_cb_t(3) Restart Marker Plugin
• globus_ftp_client_restart_marker_plugin_destroy(3) Restart Marker Plugin
• globus_ftp_client_restart_marker_plugin_init(3) Restart Marker Plugin
• globus_ftp_client_restart_marker_plugin_marker_cb_t(3) Restart Marker Plugin
• GLOBUS_FTP_CLIENT_RESTART_MARKER_PLUGIN_MODULE(3) Restart Marker Plugin
• globus_ftp_client_restart_marker_plugin.h(3) GridFTP Restart Marker Plugin Implementation.
• globus_ftp_client_restart_marker_plugin(3) Restart Marker Plugin
• globus_ftp_client_restart_marker_set_ascii_offset(3) Restart Markers
• globus_ftp_client_restart_marker_set_offset(3) Restart Markers
• globus_ftp_client_restart_marker_t(3) Restart marker.
• globus_ftp_client_restart_marker_to_string(3) Restart Markers
• globus_ftp_client_restart_marker(3) Restart Markers
• globus_ftp_client_restart_plugin_destroy(3) Restart Plugin
• globus_ftp_client_restart_plugin_init(3) Restart Plugin
• GLOBUS_FTP_CLIENT_RESTART_PLUGIN_MODULE(3) Restart Plugin
• globus_ftp_client_restart_plugin.h(3) GridFTP Restart Plugin Implementation.
• globus_ftp_client_restart_plugin(3) Restart Plugin
• globus_ftp_client_restart_stream_t(3) Stream mode restart marker.
• globus_i_ftp_client_restart_s(3) Restart information management.
• globus-fork-starter(8) Start and monitor a fork job
• gnome-flashback-xmonad(1) Start a GNOME Flashback session with XMonad
• gnome-session(1) Start the GNOME desktop environment
• gnuchessu(6) Start GNU Chess in UCI mode.
• gnurobbo(6) remake of Robbo, the classical Atari game
• gosa(1) start script for the GOsa web interface
• gp-collect-app(1) collect performance data for the target application
• gp-display-src(1) display the source code, optionally interleaved with the disassembly of the target object
• gsm_explode(3) gsm_explode, gsm_implode — GSM\ 06supplementary functions for testing
• gsm_implode(3) gsm_explode, gsm_implode — GSM\ 06supplementary functions for testing
• gsm_print(3) gsm_print \(em GSM\ 06supplementary function for debugging
• gst2ascii(1) Filter and output Atari program symbol table as ASCII
• gtf2starch(1) manual page for gtf2starch 2.4.41+dfsg
• guitarix(1) A Rock guitar amplifier for Jack
• gunzip(1) compress or expand files
• gvf2starch(1) manual page for gvf2starch 2.4.41+dfsg
• gzip(1) compress or expand files
• gzrecover(1) gzip recovery toolkit
• gztool(1) extract random-positioned data from gzip files, even like `tail -f`
• hatari_profile(1) Post-processor for Hatari profiler data
• hatari-prg-args(1) prg-args - autorun Atari programs with arguments
• hatari(1) Atari ST/STE/TT/Falcon emulator
• hawki_util_stdstars(7) (OBSOLETE) Standard stars catalog creation
• hboot(1) Start LAM on the local node.
• hconsole(1) Interactive Python console for using Hatari's remote API
• hmsa(1) Atari MSA / ST disk image creator and converter
• ibsrpdm(8) Discover SRP targets on an InfiniBand Fabric
• ibv_wr_abort(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_atomic_cmp_swp(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_atomic_fetch_add(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_bind_mw(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_complete(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_local_inv(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_post(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_rdma_read(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_rdma_write_imm(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_rdma_write(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_send_imm(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_send_inv(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_send_tso(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_send(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_set_inline_data_list(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_set_inline_data(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_set_sge_list(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_set_sge(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_set_ud_addr(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_set_xrc_srqn(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• ibv_wr_start(3) ibv_wr_abort, ibv_wr_complete, ibv_wr_start - Manage regions allowed to post work ibv_wr_atomic_cmp_swp, ibv_wr_atomic_fetch_add - Post remote atomic
• icecc-create-env(1) Create an Icrecream environment tarball
• icmstart.rc(7) The icmstart(1) resource file
• icmstart(1) A startup script for icmbuild program maintenance
• igzip(1) compress or decompress files similar to gzip
• imp2vs(1) Bible/Commentary module creation tool
• initgroups(3) initialize the supplementary group access list
• inmidas(1) MIDAS start-up procedure for users.
• iodine-client-start(8) start an iodine IPv4-over-DNS tunnel
• ipcluster(1) start an IPython cluster
• ipcontroller(1) starts an IPython cluster controller
• ipengine(1) start an IPython cluster engine
• ipmctl-start-diagnostic(1) Starts a diagnostic test
• ipmctl-start-session(1) Starts a recording or playback session.
• ipsec__plutorun(8) internal script to (re)start pluto on old SYSV initscript systems
• ipsec_show(8) see if a target IP address would get encrypted or not
• iscsi_discovery(8) discover iSCSI targets
• iscsi_node_target_name_get(3) Retrieve target name of specified iSCSI node.
• iscsi_node_tpgt_get(3) Retrieve target portal group tag of specified iSCSI node.
• iscsi_session_address_get(3) Retrieve iSCSI target address of specified session
• iscsi_session_persistent_address_get(3) Retrieve iSCSI target persistent address of specified session
• iscsi_session_persistent_port_get(3) Retrieve iSCSI target persistent port of specified session
• iscsi_session_port_get(3) Retrieve iSCSI target port of specified session
• iscsi_session_target_name_get(3) Retrieve iSCSI target name of specified session
• iscsi_session_tgt_reset_tmo_get(3) Retrieve target response timeout value of of specified session
• iscsi_session_tpgt_get(3) Retrieve target portal group tag of specified session
• iscsi-ls(1) Utility to list iSCSI targets and LUNs
• isochron-daemon(8) isochron-daemon - Start an isochron program waiting for management commands
• isochron-rcv(8) isochron-rcv - Start an isochron test in the role of a receiver
• isochron-send(8) isochron-send - Start an isochron test in the role of a sender
• istgt(1) iSCSI target
• istgtcontrol(1) istgt iSCSI target command utility
• jabberd2-jabberd(8) jabberd startup script
• jconsole(1) start a graphical console to monitor and manage Java
• jeuclid-cli(1) manual page for usage: jeuclid-cli <source file(s)> <target file/directory> [options]
• jk_chrootlaunch(8) a launcher that can start a daemon in a jail, with a specified uid and gid
• jps(1) list the instrumented JVMs on the target system
• jtightvncviewer(1) Command line starter of the Java TightVNC viewer
• jupyter-server(1) start a tornado-based jupyter server
• kcapi_aead_stream_init_dec(3) start a decryption operation (stream)
• kcapi_aead_stream_init_enc(3) start an encryption operation (stream)
• kcapi_akcipher_stream_init_dec(3) start an decryption operation (stream)
• kcapi_akcipher_stream_init_enc(3) start an encryption operation (stream)
• kcapi_akcipher_stream_init_sgn(3) start an signing operation (stream)
• kcapi_akcipher_stream_init_vfy(3) start an signature verification operation (stream)
• kcapi_cipher_stream_init_dec(3) start a decryption operation (stream)
• kcapi_cipher_stream_init_enc(3) start an encryption operation (stream)
• knet_handle_setfwd(3) Start packet forwarding.
• knockpy(1) Python3 tool designed to enumerate subdomains on a target domain
• ksmbd.mountd(8) start the kernel smb daemon
• kubectl-kustomize(1) Build a kustomization target from a directory or a remote url.
• kubectl-rollout-restart(1) Restart a resource
• lamboot(1) Start a LAM multicomputer.
• libdrop_ambient(7) force application started with ambient capabilities to drop them
• libssh2_channel_exec(3) libssh2_channel_exec - convenience macro for libssh2_channel_process_startup(3) calls
• libssh2_channel_process_startup(3) libssh2_channel_process_startup - request a shell on a channel
• libssh2_channel_shell(3) libssh2_channel_shell - convenience macro for libssh2_channel_process_startup(3) calls
• libssh2_channel_subsystem(3) libssh2_channel_subsystem - convenience macro for libssh2_channel_process_startup(3) calls
• libssh2_session_startup(3) libssh2_session_startup - begin transport layer
• likwid-genTopoCfg(1) Get system topology and write them to file for faster LIKWID startup
• likwid-mpirun(1) A tool to start and monitor MPI applications with LIKWID
• Lintian::Processable::Source::Components(3) interface to orig tar components
• llvm-tblgen-13(1) Target Description to C++ Code for LLVM
• llvm-tblgen-14(1) Target Description to C++ Code for LLVM
• llvm-tblgen-15(1) Target Description to C++ Code for LLVM
• llvm-tblgen-16(1) Target Description to C++ Code for LLVM
• llvm-tblgen-19(1) Target Description to C++ Code for LLVM
• llvm-tli-checker-14(1) TargetLibraryInfo vs library checker
• llvm-tli-checker-15(1) TargetLibraryInfo vs library checker
• llvm-tli-checker-16(1) TargetLibraryInfo vs library checker
• llvm-tli-checker-19(1) TargetLibraryInfo vs library checker
• lp-project-upload(1) project-upload - Upload a release tarball to a Launchpad project.
• lprint-server(1) start a label print server.
• lrz(1) gzip compatible command line variant of lrzip
• lrzuntar(1) Extract whole tarball from .tar.lrz files
• lttng-start(1) Start an LTTng recording session
• lxc-autostart(1) start/stop/kill auto-started containers
• lxc-start(1) mock lxc-start command used by LAVA
• lxc-unpriv-attach(1) start a process inside a running container.
• lxc.launch(1) lxc-launch - Create and start instances from images
• lxc.restart(1) lxc-restart - Restart instances
• lxc.start(1) lxc-start - Start instances
• lxd.activateifneeded(1) lxd-activateifneeded - Check if LXD should be started
• lxsession-xdg-autostart(1) lxsession's autostart runner
• lz(1) gunzips and shows a listing of a gzip'd tar'd archive
• M2-binary(1) M2 - start Macaulay2, a software system for algebraic geometry research.
• M2(1) M2 - start Macaulay2, a software system for algebraic geometry research.
• madbomber(6) a clone of Activision's classic Atari 2600 game, "Kaboom!
• maildirquota.courier(7) voluntary Maildir quotas
• make-first-existing-target(1) first-existing-target - runs make on one of several targets
• makedeltarpm(8) create a deltarpm from two rpms
• makeflow_mpi_starter(1) makeflow_mpi_starter - mpi wrapper program for makeflow and workqueue
• mapsembler_extend(1) extends a DNA sequence of interest given a set of reads, by computing a targeted micro assembly
• mapsembler2_extend(1) extends a DNA sequence of interest given a set of reads, by computing a targeted micro assembly
• mariadbd-safe(1) MariaDB server startup script (mysqld_safe is now a symlink to mariadbd-safe)
• mate-session-properties(1) Configure applications to start on login.
• mate-session(1) Start the MATE Desktop Environment.
• mate-wm(1) Start the window manager configured by the user
• mbed-test-wrapper(1) \f[B]mbed-test-wrapper\f[R] - wrap the Mbed test loader to run tests on target hardware
• mdb_readers(3) Readers don't acquire any locks for their data access.
• mercurial-importorig(1) mercurial-importorig - Import upstream source code tarballs into package Mercurial repository.
• mercurial-pristinetar(1) mercurial-pristinetar - Recreate pristine source tarballs.
• metar(1) demo METAR utility for FlightGear
• mfscgiserv(8) start HTTP/CGI server for Moose File System monitoring
• mfschunkserver(8) start, restart or stop Moose File System chunkserver process
• mfsmaster(8) start, restart or stop Moose File System master process
• mfsmetalogger(8) start, restart or stop Moose File System metalogger process
• mGridExec(1) Start the execution of the mosaic on the grid
• minlog(1) starts Emacs and runs Minlog in it.
• miwm-session(1) session - Start up the MIWM window Manager
• mk-origtargz(1) origtargz - rename upstream tarball, optionally changing the compression and removing unwanted files
• mkxlax(1) mkxlax - xlax and xterm startup program
• mmtarfilter(1) filter a tarball like dpkg does
• modbus_mapping_new_start_address(3) allocate four arrays of bits and registers accessible from their starting addresses
• mongoc_apm_command_started_get_command_name(3) mongoc_apm_command_started_get_command_name()
• mongoc_apm_command_started_get_command(3) mongoc_apm_command_started_get_command()
• mongoc_apm_command_started_get_context(3) mongoc_apm_command_started_get_context()
• mongoc_apm_command_started_get_database_name(3) mongoc_apm_command_started_get_database_name()
• mongoc_apm_command_started_get_host(3) mongoc_apm_command_started_get_host()
• mongoc_apm_command_started_get_operation_id(3) mongoc_apm_command_started_get_operation_id()
• mongoc_apm_command_started_get_request_id(3) mongoc_apm_command_started_get_request_id()
• mongoc_apm_command_started_get_server_connection_id(3) mongoc_apm_command_started_get_server_connection_id()
• mongoc_apm_command_started_get_server_id(3) mongoc_apm_command_started_get_server_id()
• mongoc_apm_command_started_get_service_id(3) mongoc_apm_command_started_get_service_id()
• mongoc_apm_command_started_t(3) mongoc_apm_command_started_t
• mongoc_apm_server_heartbeat_started_get_awaited(3) mongoc_apm_server_heartbeat_started_get_awaited()
• mongoc_apm_server_heartbeat_started_get_context(3) mongoc_apm_server_heartbeat_started_get_context()
• mongoc_apm_server_heartbeat_started_get_host(3) mongoc_apm_server_heartbeat_started_get_host()
• mongoc_apm_server_heartbeat_started_t(3) mongoc_apm_server_heartbeat_started_t
• mongoc_apm_set_command_started_cb(3) mongoc_apm_set_command_started_cb()
• mongoc_apm_set_server_heartbeat_started_cb(3) mongoc_apm_set_server_heartbeat_started_cb()
• mongoc_client_session_start_transaction(3) mongoc_client_session_start_transaction()
• mongoc_client_start_session(3) mongoc_client_start_session()
• mori-11d.x(1) star triangulations of a polytope P* in N
• mori-4d.x(1) star triangulations of a polytope P* in N
• mori-5d.x(1) star triangulations of a polytope P* in N
• mori-6d.x(1) star triangulations of a polytope P* in N
• mori.x(1) star triangulations of a polytope P* in N
• MPI_Accumulate_c(3) Accumulate data into the target process using remote memory access
• MPI_Accumulate.openmpi(3) Combines the contents of the origin buffer with that of a target buffer.
• MPI_Comm_idup.openmpi(3) Start the nonblocking duplication of an existing communicator with all its cached information.
• MPI_Fetch_and_op.openmpi(3) Combines the contents of the origin buffer with that of a target buffer and returns the target buffer value.
• MPI_File_iread_all.openmpi(3) Reads a file starting at the location specified by the individual file pointer (nonblocking, collective).
• MPI_File_iread.openmpi(3) Reads a file starting at the location specified by the individual file pointer (nonblocking, noncollective).
• MPI_File_iwrite_all.openmpi(3) Writes a file starting at the location specified by the individual file pointer (nonblocking, collective).
• MPI_File_iwrite.openmpi(3) Writes a file starting at the location specified by the individual file pointer (nonblocking, noncollective).
• MPI_File_read_all_begin.openmpi(3) Reads a file starting at the locations specified by individual file pointers; beginning part of a split collective routine
• MPI_File_read_all_end.openmpi(3) Reads a file starting at the locations specified by individual file pointers; ending part of a split collective routine
• MPI_File_read_all.openmpi(3) Reads a file starting at the locations specified by individual file pointers (blocking, collective).
• MPI_File_read.openmpi(3) Reads a file starting at the location specified by the individual file pointer (blocking, noncollective).
• MPI_File_write_all_begin.openmpi(3) Writes a file starting at the locations specified by individual file pointers; beginning part of a split collective routine
• MPI_File_write_all_end.openmpi(3) Writes a file starting at the locations specified by individual file pointers; ending part of a split collective routine
• MPI_File_write_all.openmpi(3) Writes a file starting at the locations specified by individual file pointers (blocking, collective).
• MPI_File_write.openmpi(3) Writes a file starting at the location specified by the individual file pointer (blocking, noncollective).
• MPI_Get_accumulate.openmpi(3) Combines the contents of the origin buffer with that of a target buffer and returns the target buffer value.
• MPI_Get.openmpi(3) Copies data from the target memory to the origin.
• MPI_Grequest_start.openmpi(3) Starts a generalized request and returns a handle to it in request.
• MPI_Ibsend_c(3) Starts a nonblocking buffered send
• MPI_Ibsend.openmpi(3) Starts a nonblocking buffered send.
• MPI_Ibsend(3) Starts a nonblocking buffered send
• MPI_Irecv.openmpi(3) Starts a standard-mode, nonblocking receive.
• MPI_Irsend_c(3) Starts a nonblocking ready send
• MPI_Irsend.openmpi(3) Starts a ready-mode nonblocking send.
• MPI_Irsend(3) Starts a nonblocking ready send
• MPI_Isend.openmpi(3) Starts a standard-mode, nonblocking send.
• MPI_Isendrecv_c(3) Starts a nonblocking send and receive
• MPI_Isendrecv_replace_c(3) Starts a nonblocking send and receive with a single buffer
• MPI_Isendrecv_replace(3) Starts a nonblocking send and receive with a single buffer
• MPI_Isendrecv(3) Starts a nonblocking send and receive
• MPI_Issend_c(3) Starts a nonblocking synchronous send
• MPI_Issend.openmpi(3) Starts a nonblocking synchronous send.
• MPI_Issend(3) Starts a nonblocking synchronous send
• MPI_Put.openmpi(3) Copies data from the origin memory to the target.
• MPI_Raccumulate_c(3) Accumulate data into the target process using remote memory access
• MPI_Raccumulate(3) Accumulate data into the target process using remote memory access
• MPI_Startall.openmpi(3) Starts a collection of requests.
• MPI_Startall(3) Starts a collection of requests
• MPI_T_pvar_start.openmpi(3) Start/stop a performance variable
• MPI_T_pvar_start(3) Start a performance variable
• MPI_Win_complete.openmpi(3) Completes an RMA access epoch on win started by a call to MPI_Win_start
• MPI_Win_flush_all(3) Complete all outstanding RMA operations at all targets
• MPI_Win_flush_local_all(3) Complete locally all outstanding RMA operations at all targets
• MPI_Win_flush_local(3) Complete locally all outstanding RMA operations at the given target
• MPI_Win_flush.openmpi(3) Complete all outstanding RMA operations at both the origin and the target
• MPI_Win_flush(3) Complete all outstanding RMA operations at the given target
• MPI_Win_lock_all.openmpi(3) Starts an RMA access epoch locking access to all processes in the window
• MPI_Win_lock.openmpi(3) Starts an RMA access epoch locking access to a particular rank.
• MPI_Win_Lock(3) Starts an RMA access epoch
• MPI_Win_post.openmpi(3) Starts an RMA exposure epoch for the local window associated with win
• MPI_Win_post(3) Starts an RMA exposure epoch for a local window
• MPI_Win_start.openmpi(3) Starts an RMA access epoch for win
• MPI_Win_start(3) Starts an RMA access epoch
• MPI_Win_unlock_all.openmpi(3) Completes an RMA access epoch started by a call to MPI_Win_lock_all.
• MPI_Win_unlock.openmpi(3) Completes an RMA access epoch started by a call to MPI_Win_lock.
• MPI_Win_unlock(3) Completes an RMA access epoch started by a call to MPI_WIN_LOCK
• MPI_Win_wait.openmpi(3) Completes an RMA exposure epoch started by a call to MPI_Win_post on win
• msr_endtime(3) msr_starttime - Start and end time determination for MSRecord structures
• msr_starttime_uc(3) msr_starttime - Start and end time determination for MSRecord structures
• msr_starttime(3) msr_starttime - Start and end time determination for MSRecord structures
• mtp_structar(3) structar
• mtx-texworks(1) mtx-texworks - TeXworks Startup Script
• multipath(8) Device mapper target autoconfig.
• muse_standard(7) Create a flux response curve from a standard star exposure.
• mxtar(1) Wrapper for using GNU tar directly from a floppy disk
• mysqld_safe(1) MariaDB server startup script (mysqld_safe is now a symlink to mariadbd-safe)
• naco_util_img_std_cat(7) Standard star catalog creation
• naptime.bt.bt(8) Trace voluntary sleep calls. Uses bpftrace/eBPF.
• nbdkit-gzip-filter(1) gzip-filter - decompress a .gz file
• nbdkit-tar-filter(1) tar-filter - read and write files inside tar files without unpacking
• ncoffsets(1) print the starting/ending file offsets for netCDF variables
• ndctl-start-scrub(1) start an Address Range Scrub (ARS) operation
• needrestart-session(1) session - helper application for needrestart.
• needrestart(1) needrestart
• needs-restarting(1) redirecting to DNF needs-restarting Plugin
• neotoppm(1) neotoppm - convert an Atari Neochrome into a PPM image synopsis
• nfc-dep-target(1) Demonstration tool to send/received data as D.E.P. target
• nfc-emulate-uid(1) NFC target emulation command line tool based on libnfc
• nfc-list(1) list NFC targets
• nfc-poll(1) poll first available NFC target
• notmuch-setup(1) getting started with notmuch
• npm-restart(1) npm-restart
• npm-star(1) npm-star
• npm-stars(1) npm-stars
• npm-start(1) npm-start
• npm-unstar(1) npm-unstar
• nrattach(8) Start a NET/ROM interface
• nvme_ctrl_first_ns(2) Start namespace iterator
• nvme_ctrl_first_path(2) Start path iterator
• nvme_dev_self_test(2) Start or abort a self test
• nvme_first_host(2) Start host iterator
• nvme_first_subsystem(2) Start subsystem iterator
• nvme_format_nvm_start_event(2) Format NVM Start Event Data
• nvme_mi_admin_sanitize_nvm(2) Start a subsystem Sanitize operation
• nvme_namespace_first_path(2) Start path iterator
• nvme_sanitize_nvm(2) Start a sanitize operation
• nvme_sanitize_start_event(2) Sanitize Start Event Data
• nvme_subsystem_first_ns(2) Start namespace iterator
• nvme-wdc-drive-essentials(1) Retrieve WDC devices drive essentials bin files and save to a tar file.
• nyancat(1) terminal-based Pop Tart Cat animation
• oar-server(1) server - daemon wrapper to start the oar server (Almighty)
• ocf_heartbeat_AoEtarget(7) Manages ATA-over-Ethernet (AoE) target exports
• ocf_heartbeat_iscsi(7) Manages a local iSCSI initiator and its connections to iSCSI targets
• ocf_heartbeat_iSCSITarget(7) iSCSI target export agent
• ocf_heartbeat_nvmet-namespace(7) NVMe-oF target export agent
• ocf_heartbeat_nvmet-port(7) NVMe-oF target export agent
• ocf_heartbeat_nvmet-subsystem(7) NVMe-oF target export agent
• ocfs2_hb_ctl(8) Starts and stops the O2CB local heartbeat on a given device.
• oggz-chop(1) oggz-chop \(em Extract the part of an Ogg file between given start and/or end times.
• oidc-agent-service(1) easily restart oidc-agent throughout a session
• ompi_crcp(7) Open MPI MCA Checkpoint/Restart Coordination Protocol (CRCP) Framework:
• opacapture(1) opacapture (Host) Captures critical system information into a zipped tar file.
• opacmdall(8) opacmdall (Linux and Switch) Executes a command on all hosts or Intel(R) Omni-Path Chassis.
• opaesmanalysis(8) opaesmanalysis (Switch) Performs analysis of the embedded Subnet Manager (SM) for configuration and health.
• opafastfabric(8) opafastfabric (Switch and Host) Starts the top-level Intel(R) Omni-Path Fabric Suite FastFabric Text-based User Interface (TUI) menu to enable setup
• opafindgood(8) opafindgood Checks for hosts that are able to be pinged, accessed via SSH, and active on the Intel(R) Omni-Path Fabric.
• opal_crs(7) Open PAL MCA Checkpoint/Restart Service (CRS): Overview of Open PAL's
• opapacketcapture(1) opapacketcapture Starts capturing packet data.
• opascpall(8) opascpall (Linux) Copies files or directories from the current system to multiple hosts in the fabric.
• opatop(8) opatop Starts the Fabric Performance Monitor (opatop) Text-based User Interface (TUI) menu to display performance, congestion, and error information
• opaxmlgenerate(8) opaxmlgenerate (Linux) Takes comma-separated-values (CSV) data as input and generates sequences of XML containing user-specified element names and
• opentool(1) Command line tool for starting tools
• openvt(1) start a program on a new virtual terminal (VT).
• orient(9) Provide a PID command input for orientation mode based on current spindle position, target angle and orient mode
• origtargz(1) fetch the orig tarball of a Debian package from various sources, and unpack it
• orted(1) orted - Start an Open RTE User-Level Daemon
• ostinato(1) Starts a Ostinato client.
• ostree-export(1) Generate a tar archive from an OSTree commit
• ostree-log(1) Show log starting at a commit or ref
• ostree-rev-parse(1) Output the target of a rev
• ovs-ctl(8) OVS startup helper script
• ovs-kmod-ctl(8) kmod-ctl - OVS startup helper script for loading kernel modules
• pam_open_session(3) start PAM session management
• pam_setquota(8) PAM module to set or modify disk quotas on session start
• pam_sm_open_session(3) PAM service function to start session management
• pamtotga(1) pamtotga - convert a Netpbm image to a TrueVision Targa file synopsis
• pbmtopi3(1) pbmtopi3 - convert a PBM image into an Atari Degas file synopsis
• pc1toppm(1) pc1toppm - convert an Atari Degas into a PPM image synopsis
• pcre2api(3) PCRE2 - Perl-compatible regular expressions (revised API) #include <pcre2> PCRE2 is a new API for PCRE, starting at release 10.
• pcre2demo(3) // - A demonstration C program for PCRE2 - // .\" Start example.
• pelican-quickstart(1) kickstart a Pelican blog
• perlrequick(1) Perl regular expressions quick start
• pg_ctlcluster(1) start/stop/restart/reload a PostgreSQL cluster
• pgzf(1) Parallel gzip file IO
• phosh-session(1) Session startup script for phosh
• pi1toppm(1) pi1toppm - convert an Atari Degas into a PPM image synopsis
• pi3topbm(1) pi3topbm - convert an Atari Degas file into a PBM image synopsis
• piuparts_slave_run(8) start up piuparts-slave instance(s) in screen
• pkgos-alternative-bin(8) pkgos-alternative-bin - add alternative(s) simlink ( see update-alternatives(8) ) of the python (version 2 and 3) target package in the
• pkgos-fetch-fake-repo(8) prepear repository(folder) which contain Packages.gz and Sources.gz files of target distribution.
• pkgos-fix-config-default(8) change value of parameter for target section in mentioned configure file.
• pkgos-testr(8) run testes for target python package.
• planets(1) Gravitational simulation of planetary bodies
• plog(1) starts up, shuts down or lists the log of PPP connections
• pmqtest(8) Start pairs of threads and measure the latency of interprocess communication with POSIX messages queues
• podman-export(1) podman-export - Export a container's filesystem contents as a tar archive
• podman-import(1) podman-import - Import a tarball and save it as a filesystem image
• podman-load(1) podman-load - Load image(s) from a tar archive into container storage
• podman-machine-start(1) podman-machine-start - Start a virtual machine
• podman-pod-restart(1) podman-pod-restart - Restart one or more pods
• podman-pod-start(1) podman-pod-start - Start one or more pods
• podman-restart(1) podman-restart - Restart one or more containers
• podman-start(1) podman-start - Start one or more containers
• podman-volume-export(1) podman-volume-export - Exports volume to external tar
• podman-volume-import(1) podman-volume-import - Import tarball contents into an existing podman volume
• poff(1) starts up, shuts down or lists the log of PPP connections
• pon(1) starts up, shuts down or lists the log of PPP connections
• pop3d-ssl(8) Start or stop the Courier POP3 server
• pop3d(8) Start or stop the Courier POP3 server
• poswap(1) Builds a new translation file with the target of the input language as
• ppmforge(1) ppmforge - fractal forgeries of clouds, planets, and starry skies synopsis
• ppmtoneo(1) ppmtoneo - convert a PPM into an Atari Neochrome file synopsis
• ppmtopi1(1) ppmtopi1 - convert a PPM image into an Atari Degas file synopsis
• ppmtospu(1) ppmtospu - convert a PPM image to an Atari Spectrum 512 image synopsis
• pppoe.conf(5) Configuration file used by pppoe-start(8),
• printtarg(1) Generate Target PostScrip file.
• pristine-lfs(1) store pristine tarballs in Git LFS
• pristine-tar(1) tar - regenerate pristine tarballs
• profanity-avatar(1) the Profanity /avatar command.
• proofgeneral(1) start Emacs with the Proof General splash screen
• PS_begin_font(3) PS_begin_font \(em Starts a new Type3 font
• PS_begin_glyph(3) PS_begin_glyph \(em Starts a new glyph in a Type3 font
• PS_begin_page(3) PS_begin_page \(em Start a new page
• PS_begin_pattern(3) PS_begin_pattern \(em Starts a new pattern
• PS_begin_template(3) PS_begin_template \(em Starts a new template
• psl2starch(1) manual page for psl2starch 2.4.41+dfsg
• ptar(1) a tar-like program written in perl
• ptargrep(1) Apply pattern matching to the contents of files in a tar archive
• ptsematest(8) Start two threads and measure the latency of interprocess communication with POSIX mutex.
• pure-ftpd-wrapper(8) ftpd-wrapper - configures and starts Pure-FTPd daemon
• PX_set_targetencoding(3) PX_set_targetencoding \(em Set encoding for output
• pydevd(1) pydevd - Script to start pydevd debugger
• pymetar(1) query METAR information and display it in a user-friendly way
• pypi-download(1) downloads tarballs from PyPI
• qb_log_custom_close(3) Close a custom log target and release its resources.
• qb_log_custom_open(3) Open a custom log target.
• qb_log_file_reopen(3) Open a new log file for an existing target.
• qb_log_filter_ctl(3) This allows you modify the 'tags' and 'targets' callsite fields at runtime.
• qb_log_filter_fn_set(3) Instead of using the qb_log_filter_ctl() functions you can apply the filters manually by defining a callback and setting the targets field using
• qb_log_target_user_data_get(3) Retrieve the user data set by either qb_log_custom_open or qb_log_target_user_data_set.
• qb_log_target_user_data_set(3) Associate user data with this log target.
• qb_log_thread_start(3) Start the logging pthread.
• qb_util_stopwatch_start(3) Start the stopwatch.
• qprogram-starter(1) A program starter tool
• qstail(1) an utility printing the end of a log file starting at the specified pattern.
• query-starkd(1) Search index files for stars near a given point on the sky
• rakarrack(1) guitar effects processor for GNU/Linux
• rc-local.service(8) Compatibility generator and service to start /etc/rc.local during boot
• rc.news(8) Start or stop INN daemons
• readbuffer(1) read input from devices which don't like constant stopping and starting
• recon(1) Check if LAM can be started.
• register-stardata(8) stardata - Install or remove star data catalogues and astronomy programs
• remote_startup(5) the Grid Engine remote startup mechanism
• repo-start(1) manual page for repo start
• rerun(1) run programs and restarts them on filesystem changes
• restart_syscall(2) restart a system call after interruption by a stop signal
• rmiregistry(1) create and start a remote object registry on the
• rmsk2starch(1) manual page for rmsk2starch 2.4.41+dfsg
• RNAeffective(1) calculation of effective numbers of orthologous miRNA targets
• rocksndiamonds-bin(6) starts the Rocks'n'Diamonds game
• rocksndiamonds(6) starts the Rocks'n'Diamonds game
• rpm2archive(8) rpm2archive - Create tar archive from RPM Package Manager (RPM) package.
• rpmemd(1) librpmem target node process (DEPRECATED)
• rqworker(1) Command line monitor to start an RQ worker.
• rsattach(8) Start a Rose interface
• rsem-prepare-reference(1) prepare-reference - Prepare transcript references for RSEM and optionally build BOWTIE/BOWTIE2/STAR/HISAT2(transcriptome)
• rst_deck(1) Convert simulation deck to a deck ready for restart
• rstart(1) rstart - a sample implementation of a Remote Start client
• rstartd(1) rstartd - a sample implementation of a Remote Start rsh helper
• RTPBaseUDPIPv4Socket(3) A UDP/IPv4 socket class targeted at RTP stacks.
• run-split-theme-d-program(1) run Theme-D program with split target
• runc-run(8) runc-run - create and start a container
• runc-start(8) start a previously created container
• runsv(8) starts and monitors a service and optionally an appendant log
• runsvdir(8) starts and monitors a collection of runsv(8) processes
• s3d_clone_target(3) changes the target of a clone-object
• sam_start(3) Start health checking
• sam2starch(1) manual page for sam2starch 2.4.41+dfsg
• samba-dcerpcd(8) This is one of Sambas DCERPC server processes that can listen on sockets where RPC services are offered and is the parent process of the DCERPC
• sc_BitArrayLTri(3) sc::BitArrayLTri
• sc_MemoryDataRequest(3) sc::MemoryDataRequest
• sc_MemoryDataRequestQueue(3) sc::MemoryDataRequestQueue
• sc_ShmMessageGrp(3) The ShmMessageGrp class is an implementation of MessageGrp that allows multiple process to be started that communicate with shared
• scsi_start(8) start one or more SCSI disks
• sd_notify_barrier(3) Notify service manager about start-up completion and other service status changes
• sd_notify(3) Notify service manager about start-up completion and other service status changes
• sd_notifyf(3) Notify service manager about start-up completion and other service status changes
• sd_pid_notify_with_fds(3) Notify service manager about start-up completion and other service status changes
• sd_pid_notify(3) Notify service manager about start-up completion and other service status changes
• sd_pid_notifyf(3) Notify service manager about start-up completion and other service status changes
• sdcv(1) console version of StarDict program
• SDL_CondBroadcast(3) Restart all threads waiting on a condition variable
• SDL_CondSignal(3) Restart a thread wait on a condition variable
• SDL_VideoInfo(3) Video Target information
• seatd-launch(1) seatd-launch - Start a process with its own seatd instance
• send_arp(8) Send out one ARP packet with source/target IP and Ethernet
• setgroups(2) get/set list of supplementary group IDs
• setgroups32(2) get/set list of supplementary group IDs
• setup-packaging-environment(1) helps one to get started with Ubuntu development
• sg_reset(8) sends SCSI device, target, bus or host reset; or checks reset
• sg_rtpg(8) send SCSI REPORT TARGET PORT GROUPS command
• sg_start(8) send SCSI START STOP UNIT command: start, stop, load or eject
• sg_stpg(8) send SCSI SET TARGET PORT GROUPS command
• shape_tar(1) shapeTools RMS bundle up subsystem in a tar or shar archive
• shellia(7) shellia is a library that allows to run shell scripts interactive.
• shmem_broadcast32.openmpi(3) Copy a data object from a designated PE to a target
• shtool-tarball(1) tarball - GNU shtool command for rolling standardized tarballs
• siac-miner-start(1) miner-start - Start cpu mining
• sigwaittest(8) Start two threads or fork two processes and measure the latency between sending and receiving a signal
• sim4db(1) batch spliced alignment of cDNA sequences to a target genome
• SLONIK_RESTART_NODE(7) Restart Slony-I node
• SLONIK_SUBSCRIBE_SET(7) Start replication of Slony-I set
• Smokeping_sorters_Loss(3) Order the target charts by loss
• Smokeping_sorters_Max(3) Order the target charts by Max RTT
• Smokeping_sorters_Median(3) Order the target charts by Median RTT
• Smokeping_sorters_StdDev(3) Order the target charts by StdDev
• snake4(6) Game starring a fruit-eating snake.
• snake4scores(6) Game starring a fruit-eating snake.
• spctoppm(1) spctoppm - convert an Atari compressed Spectrum file to a PPM synopsis
• sputoppm(1) sputoppm - convert an Atari uncompressed Spectrum file to a PPM image synopsis
• sqfs2tar(1) turn a SquashFS image into a tar archive
• sqfstar(1) sqfstar - tool to create a squashfs filesystem from a tar archive
• srp_daemon(8) Discovers SRP targets in an InfiniBand Fabric
• ss_adpcm_decode(1) Tool for converting ADPCM Singstar audio format to WAV
• ss_chc_decode(1) Tool for decoding Singstar CHC (melody cache) files
• ss_cover_conv(1) Tool for converting Singstar song cover
• ss_extract(1) Tool for converting Singstar DVDs to Ultrastar format
• ss_ipu_conv(1) Tool for converting Singstar videos
• ss_pak_extract(1) Tool for reading general PAK files (used by Singstar)
• starch-diff(1) manual page for starch-diff 2.4.41+dfsg
• starch(1) starch - STandalone application ARCHiver
• starchcat(1) manual page for starchcat 2.4.41+dfsg
• starchstrip(1) manual page for starchstrip 2.4.41+dfsg
• starconvert(1) convert text data files to StarPlot format
• stardict-editor(1) program to edit, compile and decompile stardict dictionaries
• starpkg(1) convert a StarPlot data set to StarPlot file format
• starplot(1) view 3d perspective maps of stars
• starpu_calibrate_bus(1) Force StarPU bus calibration
• starpu_codelet_histo_profile(1) Draw StarPU codelet histogram
• starpu_codelet_profile(1) Draw StarPU codelet profile
• starpu_env(1) Set StarPU environment variables
• starpu_lp2paje(1) Convert lp StarPU schedule into Paje format
• starpu_machine_display(1) Display machine StarPU information
• starpu_mpi_comm_matrix(1) Draw StarPU MPI communications matrix
• starpu_paje_draw_histogram(1) Draw StarPU trace histogram
• starpu_paje_state_stats(1) Print statistics from StarPU trace
• starpu_perfmodel_display(1) Display StarPU performance model
• starpu_perfmodel_plot(1) Plot StarPU performance model
• starpu_tasks_rec_complete(1) Complete StarPU tasks.rec file
• starpu_workers_activity(1) Display StarPU workers activity
• start_embedded(1) OTP start script example for Unix.
• start-pulseaudio-x11(1) PulseAudio Sound Server X11 Startup Script
• start-stop-daemon(8) stop-daemon - start and stop system daemon programs
• startfluxbox(1) start a fluxbox session
• starting(3) Getting Started
• startlazarus-2.2.6(1) starts lazarus program.
• startpar(1) start runlevel scripts in parallel
• startup-config(5) startup-config - configuration file for l2tpns
• starvoyager(6) 'Star Trek' themed 2D space arcade game
• stegosuite-gui(1) Starts the GUI
• stella(6) Atari 2600 emulator
• stellarium(1) A real-time realistic planetarium
• stilts(1) Starlink Tables Infrastructure Library Tool Set
• strfmon_l(3) convert monetary value to a string
• strfmon(3) convert monetary value to a string
• sumaclust(1) star clustering of genetic sequences
• supervise(8) starts and monitors a service.
• supybot-botchk(1) A script to start Supybot if it's not already running.
• svscan(8) starts and monitors a collection of services
• svscanboot(8) starts
• svsematest(8) Start two threads or fork two processes and measure the latency of SYSV semaphores
• swapoff(2) start/stop swapping to file/device
• swapon(2) start/stop swapping to file/device
• systemd-notify(1) Notify service manager about start-up completion and other daemon status changes
• systemd-rc-local-generator(8) Compatibility generator and service to start /etc/rc.local during boot
• systemd-user-runtime-dir(5) System units to start the user manager
• systemd-xdg-autostart-generator(8) User unit generator for XDG autostart files
• systemd.target(5) Target unit configuration
• tar_append_file(3) append data to tar archives
• tar_extract_all(3) high-level tar
• tar_extract_file(3) extract files from a tar archive
• tar_open(3) access a tar archive via a handle
• tar(1) an archiving utility
• tar(5) The archive format collects any number of files, directories, and other file system objects (symbolic links, device node
• tar2sqfs(1) create a SquashFS image from a tar archive
• tarantoolctl(1) a utility to control Tarantool instances
• tarcat(1) concatenates the pieces of a GNU tar multi-volume archive
• tardiff(1) Compare two tarballs and report differences
• tardy(1) a tar post-processor
• targen(1) Generate Target deviceb test chart color values.
• targetcli(8) administration shell for storage targets
• targetclid(8) daemon component for targetcli
• targets.conf(5) Linux SCSI Target Configuration File
• tarlz(1) creates tar archives with multimember lzip compression
• tep_find_function_address(3) Find function name / start address.
• tep_find_function_info(3) Find function name / start address.
• tep_find_function(3) Find function name / start address.
• tgainfo(1) display information about a Targa image
• tgatoppm(1) tgatoppm - convert TrueVision Targa file to a PPM image synopsis
• tgt-admin(8) Linux SCSI Target Configuration Tool
• tgt-setup-lun(8) Helper script that creates a target, adds a device to the target, and defines initiators that can connect to the target
• tgtadm(8) Linux SCSI Target Administration Utility
• tgtd(8) The SCSI Target Daemon
• tgtimg(8) Linux SCSI Target Framework Image File Utility
• tgz(1) makes a gzip'd tar archive
• th_get_pathname(3) extract individual fields of a tar header
• th_print_long_ls(3) print out information about a tar file header
• th_read(3) read and write a file header block from a tar archive
• th_set_from_stat(3) set fields of a tar file header
• thermald(8) start Linux thermal daemon
• tigervncserver(1) start or stop a TigerVNC standalone server
• tigervncsession(8) start a VNC server
• tigr-extract(1) tigr-glimmer \(em Fine start/stop positions of genes in genome sequence
• timew-modify(1) change start or end date of an interval
• timew-move(1) change interval start-time
• timew-start(1) start time tracking
• tlog-rec-session(8) start a shell and log terminal I/O
• to_erl(1) Attach to a running Erlang runtime system, started with run_erl
• toggle(9) 'push-on, push-off' from momentary pushbuttons
• tpm2_policycountertimer(1) \f[B]tpm2_policycountertimer\f[R](1) - Enables policy authorization by evaluating the comparison operation on the TPM parameters time, clock, reset
• tpm2_policyrestart(1) \f[B]tpm2_policyrestart\f[R](1) - Restart an existing session with the TPM.
• tpm2_startauthsession(1) \f[B]tpm2_startauthsession\f[R](1) - Start a session with the TPM.
• tpm2_startup(1) \f[B]tpm2_startup\f[R](1) - Send a startup command to the TPM.
• trace-cmd-start(1) start the Ftrace Linux kernel tracer without recording
• tracker3-daemon(1) Start, stop, restart and list daemons responsible for indexing content
• transproxy(8) transproxy - program to start transproxy mode in Linux kernel
• tsshashsequencestart(1) Runs TPM2_HashSequenceStart
• tsshmacstart(1) Runs TPM2_HmacStart
• tsspolicyrestart(1) Runs TPM2_PolicyRestart
• tssstartauthsession(1) Runs TPM2_StartAuthSession
• tssstartup(1) Runs TPM2_Startup
• tuptime(1) Report historical and statistical real time of the system, keeping it between restarts. Total uptime.
• tuxguitar(1) tuxguitar \(em program to do edit and playback guitar tablature
• twinstar(8) Control the Twinstar feature of a Xorcom Astribank
• ucimf_start(1) libucimf unicode console input method framework starter
• ukui-session-tools(1) Start the UKUI Desktop Environment.
• ukui-session(1) Start the UKUI Desktop Environment.
• unstarch(1) manual page for unstarch 2.4.41+dfsg
• unzip(1) list, test and extract compressed files in a ZIP archive
• update-sort-bed-starch-slurm(1) manual page for update-sort-bed-starch-slurm 2.4.41+dfsg
• urxvtcd(1) start a urxvtc and/or urxvtd
• user-runtime-dir@.service(5) System units to start the user manager
• user@.service(5) System units to start the user manager
• uxplay(1) start AirPlay server
• uz(1) gunzips and extracts a gzip'd tar'd archive
• valgrind-listener(1) listens on a socket for Valgrind commentary
• vcf-compare(1) compare bgzipped and tabix indexed VCF files
• vcf-isec(1) create intersections, unions, complements on bgzipped and tabix indexed VCF or tab-delimited files
• vcf-merge(1) merge the bgzipped and tabix indexed VCF files
• vcf2starch(1) manual page for vcf2starch 2.4.41+dfsg
• virt-make-fs(1) make-fs - Make a filesystem from a tar archive or files
• virt-p2v-make-kickstart(1) p2v-make-kickstart - Build the virt-p2v kickstart
• virt-tar-in(1) tar-in - Unpack a tarball into a virtual machine disk image.
• virt-tar-out(1) tar-out - Pack a virtual machine disk image directory into a tarball.
• virtualjaguar(1) An Atari Jaguar emulator
• visir_img_reduce(7) Combines a stack of chopped, jittered and/or nodded exposures and can compute the sensitivity for standard star
• visir_util_img_std_cat(7) Convert ASCII-file(s) to a FITS standard star catalog
• visir_util_spc_std_cat(7) Generate a FITS catalog of spectroscopic standard stars
• vmifustandard(7) Extract a standard star spectrum.
• whatmaps(1) Find and restart services after library upgrades
• wig2starch(1) manual page for wig2starch 2.4.41+dfsg
• wineboot-stable(1) perform Wine initialization, startup, and shutdown tasks
• woof(6) Woof! is a continuation of Lee Killough's Doom source port MBF targeted
• writebuffer(1) write output to devices which don't like constant stopping and starting
• wys(1) Daemon to start/stop PulseAudio loopbacks for phone call audio
• x0tigervncserver(1) start or stop a TigerVNC scraping server
• x2gostartagent(8) Start a New X2Go Session
• xbindkeys_autostart(1) start XBindKeys automatically
• xcb_x_print_print_start_doc_checked(3) xcb_x_print_print_start_doc -
• xcb_x_print_print_start_doc(3) xcb_x_print_print_start_doc -
• xcb_x_print_print_start_job_checked(3) xcb_x_print_print_start_job -
• xcb_x_print_print_start_job(3) xcb_x_print_print_start_job -
• xcb_x_print_print_start_page_checked(3) xcb_x_print_print_start_page -
• xcb_x_print_print_start_page(3) xcb_x_print_print_start_page -
• xcb_xevie_start_reply(3) xcb_xevie_start -
• xcb_xevie_start_unchecked(3) xcb_xevie_start -
• xcb_xevie_start(3) xcb_xevie_start -
• xdg-autostart(1) auto start programs as specified by Freedesktop.org
• xdt-autogen(1) Run autotools on a Xfce source tarball
• xfce4-session(1) Starts up the Xfce Desktop Environment
• XmClipboardStartCopy(3) XmClipboardStartCopy — A clipboard function that sets up a storage and data structure "XmClipboardStartCopy" "clipboard functions"
• XmClipboardStartRetrieve(3) XmClipboardStartRetrieve — A clipboard function that prepares to retrieve data from the clipboard "XmClipboardStartRetrieve" "clipboard
• XmDragStart(3) XmDragStart — A Drag and Drop function that initiates a drag and drop transaction "XmDragStart" "Drag and Drop functions"
• XmDropSiteStartUpdate(3) XmDropSiteStartUpdate — A Drag and Drop function that facilitates processing updates to multiple drop sites "XmDropSiteStartUpdate" "Drag and Drop
• XmDropTransferStart(3) XmDropTransferStart — A Drag and Drop function that initiates a drop transfer "XmDropTransferStart" "Drag and Drop functions"
• XmListDeleteItemsPos(3) XmListDeleteItemsPos — A List function that deletes items from the list starting at the given position "XmListDeleteItemsPos" "List functions"
• XmMainWindowSetAreas(3) XmMainWindowSetAreas — A MainWindow function that identifies manageable children for each area "XmMainWindowSetAreas" "MainWindow functions"
• xmonad-session(1) Starts the XMonad window manager as a session
• XmScrolledWindowSetAreas(3) XmScrolledWindowSetAreas — A ScrolledWindow function that adds or changes a window work region and a horizontal or vertical ScrollBar widget to the
• XmTargetsAreCompatible(3) XmTargetsAreCompatible — A function that tests whether the target types match between a drop site and source object "XmTargetsAreCompatible" "Drag
• XmTransferStartRequest(3) XmTransferStartRequest — A toolkit function that begins a MULTIPLE transfer "XmTransferStartRequest" "toolkit functions"
• xorriso-dd-target(1) dd-target - Device evaluator and disk image copier for GNU/Linux
• xpi-repack(1) repack a xpi file into a tarball
• XtCancelSelectionRequest(3) bundle multiple selection conversion requests into a single request using MULTIPLE target
• XtCreateSelectionRequest(3) bundle multiple selection conversion requests into a single request using MULTIPLE target
• XtGetSelectionParameters(3) retrieve target parameters for a selection request with a single target
• XtSendSelectionRequest(3) bundle multiple selection conversion requests into a single request using MULTIPLE target
• XtSetSelectionParameters(3) specify target parameters for a selection request with a single target
• xyzab_tdr_kins(9) Switchable kinematics for 5 axis machine with rotary table A and B
• xz(1) Compress or decompress .xz and .lzma files
• yasm_arch(7) Yasm Supported Target Architectures
• zcat(1) compress or expand files
• zforce(1) force a '.gz' extension on all gzip files
• zgrep(1) search possibly compressed files for a regular expression
• zimpatch(1) tool to compute the end_file using a start_file and a diff_file
• zip(1) package and compress (archive) files
• zmergelog(1) a fast tool to merge gzipped http log files by date
• zmq_proxy(3) start built-in 0MQ proxy
• zupdate(1) recompress bzip2, gzip, xz, zstd files to lzip format
• zzip_dir_alloc_ext_io(3) start usage.
• zzip_dir_alloc(3) start usage.
• zzip_file_open(3) start usage.
• zzip_fopen(3) start usage.
• zzip_freopen(3) start usage.
• zzip_open_ext_io(3) start usage.
• zzip_open_shared_io(3) start usage.
• zzip_open(3) start usage.
• zzip_opendir_ext_io(3) start usage.
• zzip_opendir(3) start usage.